← Tharu
Autopapyrus · Volkswagen Tharu (Taos)
https://autopapyrus.com/guides/volkswagen/tharu/checking-tire-pressure/
Compiled automatically from service literature and owner experience. Specs are for the typical configuration — check them against your exact car before you start.

Volkswagen Tharu (Taos): Checking Tire Pressure

The recommended tire pressure for the Volkswagen Tharu (Taos) is 2.3-2.5 bar (33-36 psi) on cold tires under normal load. The check is simple and requires no special skills.

Difficulty: Easy Time: 10 minutes Steps: 10 Tools: Tire pressure gauge (standalone or built into an air compressor)

Part

  • 🔩 Not required

Step by step

10 steps
  1. Make sure the tires are cold. Check the pressure before driving or at least 3 hours after the vehicle has been parked. Driving heats the tires and raises the pressure by 0.2-0.3 bar, which gives a false reading.
  2. Find the information placard with the recommended pressures. It is located on the center pillar of the driver's door (B-pillar) or in the driver's door opening. The placard lists values for the front and rear wheels depending on load.
  3. Unscrew the valve cap on each wheel. Keep the caps in a clean place, since they protect the valve stem from dirt.
  4. Press the gauge firmly onto the valve. You should hear a brief hiss, and then the gauge will show the pressure. If you use a compressor with a built-in gauge, follow the same procedure.
  5. Compare the readings with the recommended values: 2.3-2.5 bar (33-36 psi) for normal driving, or 2.7 bar (39 psi) front and 3.1 bar (45 psi) rear with a fully loaded vehicle. The acceptable deviation is 0.1-0.2 bar.
  6. If the pressure is too low, inflate the tire with the compressor. Add air in increments of 0.2-0.3 bar, checking with the gauge after each burst of air.
  7. If the pressure is too high, release air by pressing the metal pin inside the valve with the tip of the gauge or with a valve cap that has a protrusion.
  8. Repeat the procedure for all four wheels, including the spare (if a full-size spare is fitted).
  9. Screw the valve caps back on. Do not leave the valves uncovered, as this leads to contamination and air leaks.
  10. Check the TPMS (tire pressure monitoring system) on the instrument cluster. If a yellow tire symbol with an exclamation mark is lit, the system may need to be reset through the vehicle menu.

Common mistakes and warnings

  • Underinflated tires increase fuel consumption, sidewall wear and braking distance. Overinflated tires reduce the contact patch with the road, worsen grip and make the ride harsh. Check the pressure every 2-4 weeks and before long trips.