https://autopapyrus.com/catalog/audi/a8/guides/removing-and-installing-a-charge-air-pipe/
Audi A8 4.0 TFSI CGTA (2014): Removing and Installing a Charge Air Pipe
On the 4.0 TFSI (CGTA), the two turbochargers sit in the "hot-V" between the cylinder banks, and the charge air travels to the intercoolers through a system of plastic pipes and rubber connectors. A detailed step-by-step procedure for this specific model is not documented in public sources. Below is the general removal and installation order used for Audi TFSI charge air systems. Check all dimensions and torque specifications against the manufacturer's service manual.
Parts
2| № | Part | Genuine part no. |
|---|---|---|
| 01 | Charge air pipe (turbocharger to intercooler) with O-rings and clampsFind on Amazon → | 079145751G |
| 079145751F | ||
| 079145417A | ||
| 02 | Charge air recirculation (bypass) valveif neededFind on Amazon → | 06H906283B |
Amazon links search by the part name and genuine number; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.
Part numbers are from the manufacturer's original catalogue. Check them against your VIN before ordering.
Tools
7Read the codes yourself
A scanner plugged into the OBD2 port under the dashboard shows which fault codes the car has stored, before you buy any parts. Cars sold in the US from 1996, and petrol cars in Europe from 2001 (diesels from 2004), have this port.
- Basic code reader, about $20–40: reads and clears engine codes Amazon →
- Bluetooth scanner with a phone app, about $30–100: live sensor data, and on many cars ABS and airbag codes too Amazon →
Check that the scanner lists your make and model year before you buy. We may earn a commission from qualifying purchases.
There's a full repair manual for this car
Every system, wiring diagrams and torque specs — not just this job. Haynes AutoFix (online) and 3 more.
See manuals →
Step by step
12 steps- Let the engine cool down completely. Shut off the engine. If you will be working on electrical components, disconnect the negative battery terminal. Keep in mind that on the A8 you need to wait a few minutes after disconnecting, and that you may need to reset settings afterward (windows, clock).
- Remove the engine cover and the lower engine undertray. Take photos of how the pipes, vacuum hoses and connectors are routed so you can reassemble everything exactly the same way.
- Identify the pipe you need and trace what it connects to. This includes the turbocharger outlet, the intercooler and any branches: the boost pressure/temperature sensor, vacuum hoses and the bypass valve.
- Disconnect the sensor electrical connectors on the pipe: press the locking tab and pull on the connector body, not on the wires. Disconnect the vacuum and vent lines, labeling them first.
- Loosen the clamps at both ends of the pipe. The clamps may be screw-type, spring-type or quick-release. Audi quick-release fittings are released in place, so don't pry or break anything. If neighboring parts are in the way (air ducts, brackets, coolant lines), remove them as needed.
- Wiggle the pipe and pull it off the turbocharger and intercooler connections. If it is stuck, twist it around its axis without using a pry bar or screwdriver, since it is easy to damage the plastic fitting.
- Immediately cover the open ports on the turbocharger and intercooler with a clean plug or plastic film. Dirt or any object getting into the turbocharger will destroy it.
- Inspect the mating surfaces and O-rings. Cracks, oil leaks, signs of blow-by and torn rubber are reasons to replace the part. A thin oil film in the charge air path is normal on a turbo engine, but heavy oil residue needs separate diagnosis (crankcase ventilation, turbocharger condition).
- Install in reverse order. Lightly lubricate new O-rings with silicone grease or clean engine oil. Do not use thick all-purpose grease. The pipe must seat fully at both ends, without being cocked.
- Tighten the clamps carefully and evenly. The clamp torque is low (within a few N·m; use the exact value from the manufacturer's service manual). Do not overtighten, or the plastic will deform. Reconnect the sensor connectors and vacuum lines in their original positions.
- Reinstall the parts you removed, the undertray and the engine cover. Reconnect the battery.
- Start the engine, scan for fault codes and clear any that appeared incidentally. Take a test drive with some load buildup and make sure there is no whistling or hissing (boost leak) and no loss of power. Then inspect the connections once more for oil leaks and for clamps that have loosened.
Common mistakes and warnings
- Do not leave pipes and ports open: dust and small objects that get into the system damage the turbine wheels
- A pipe that is not fully seated or a clamp that is not tight enough can simply blow off under boost pressure and leave you without boost
- If you find a large amount of oil in the system or play in the turbocharger shaft, further diagnosis requires a specialist
Spotted a mistake? Tell us →
Our articles
Brand stories
The History of Audi
Audi AG is a German company and part of the Volkswagen Group, best known for building Audi cars.
Read →
Garage
Fuel Quality Indicators: What Octane and Cetane Numbers Mean
What is an octane number? What about a cetane number? Which fuel should you choose for a high-compression engine?…
Read →
Before you buy
How to Pick Up Your Car from the Dealership the Right Way
If you've decided to buy a car from a dealership, it isn't enough to simply choose a model you like, pay for it, and…
Read →