https://autopapyrus.com/catalog/chery/fora/guides/diagnosing-a-front-suspension-knock/
Chery Fora (A21): Diagnosing a Front Suspension Knock
A knock in the front suspension of the Chery Fora is most often caused by worn sway bar links, ball joints, or control arm bushings. The MacPherson strut suspension with lower control arms and a sway bar requires systematic diagnosis to identify the worn component.
Parts
7| № | Part |
|---|---|
| 01 | Sway bar linksif faultyFind on Amazon → |
| 02 | Ball jointsif faultyFind on Amazon → |
| 03 | Front control arm, rightif faultyFind on Amazon → |
| 04 | Front control arm, leftif faultyFind on Amazon → |
| 05 | Wheel bearingif faultyFind on Amazon → |
| 06 | Control arm bushingsif faultyFind on Amazon → |
| 07 | Sway bar bushingsif faultyFind on Amazon → |
Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.
Tools
6Read the codes yourself
A scanner plugged into the OBD2 port under the dashboard shows which fault codes the car has stored, before you buy any parts. Cars sold in the US from 1996, and petrol cars in Europe from 2001 (diesels from 2004), have this port.
- Basic code reader, about $20–40: reads and clears engine codes Amazon →
- Bluetooth scanner with a phone app, about $30–100: live sensor data, and on many cars ABS and airbag codes too Amazon →
Check that the scanner lists your make and model year before you buy. We may earn a commission from qualifying purchases.
Step by step
8 steps- Park the car on a level surface and lift the front wheels with jacks or a lift. Make sure it is safe to work under the vehicle.
- Check the sway bar links. Grab each link by hand and move it up and down. Play or free movement indicates worn bushings or damaged rubber elements. This is the most common cause of knocking over bumps.
- Inspect the ball joints. Insert a pry bar between the lower control arm and the steering knuckle and lift. Noticeable play or a clunk indicates a worn ball joint. Also check the ball joint boots for tears.
- Check the front control arm bushings. Visually assess the condition of the rubber bushings where the arms attach to the subframe. Cracks, separation, or rubber squeezing out of its seat mean replacement is needed.
- Check the wheel bearings. Rock the raised wheel in both the vertical and horizontal planes. Play in the vertical plane may indicate a worn wheel bearing or ball joint (confirm with the pry bar). A humming noise when the wheel spins is a clear sign of a bad bearing.
- Inspect the strut top mount bearings. Push down on the fender several times. A dull knock from above during rebound may indicate a worn top mount bearing or a worn strut bump stop.
- Check fastener tightness. Make sure the ball joint nuts, control arm mounting bolts, and sway bar link nuts are tight. Loose fasteners can be the source of the knock.
- Lower the car and take a test drive over uneven road surfaces. Pay attention to the character of the knock (frequent, light knocking: sway bar links; dull, occasional knocking: ball joints or bushings; humming: bearing).
Common mistakes and warnings
- Worn ball joints are a serious hazard, since a failure can cause loss of steering control
- If you find play in a ball joint, replace it immediately
- CTR CBM36 ball joints or original Chery A21-2909060 are recommended
- They show a service life of about 2 years under heavy use
- Control arm bushings and sway bar bushings can be replaced with polyurethane ones for longer service life
How it works · 3D
How Car Suspension Works
How the part you're working on actually works — in plain English, on a 3D model.
Open in 3D →
Spotted a mistake? Tell us →
Our articles
Before you buy
German Turbo Engines vs. Chinese Ones: Which Lasts Longer? An Honest Look at Engine Life
Volkswagen 1.4 and 2.0 TSI, BMW N20 and Mercedes M274 versus Haval, Chery and Geely engines: lifespan benchmarks…
Read →
Garage
Fuel Quality Indicators: What Octane and Cetane Numbers Mean
What is an octane number? What about a cetane number? Which fuel should you choose for a high-compression engine?…
Read →
Before you buy
How to Pick Up Your Car from the Dealership the Right Way
If you've decided to buy a car from a dealership, it isn't enough to simply choose a model you like, pay for it, and…
Read →