← TXL

Exeed TXL 1.6 (2020): Turning On the Windshield and Mirror Heating

On the Exeed TXL, the windshield, rear window and outside mirror heating is switched on with buttons on the climate control panel. On versions with Exeed Connect, it can also be switched on remotely. The heating works only with the engine running because it draws a lot of current. Button locations and the auto-off time depend on the trim level, so go by the icons on your climate panel.

DifficultyEasy Time5 minutes Steps9 ToolsNone needed

Parts

2
№Part
01 Heated circuit fuseif faultyFind on Amazon →
02 Heated circuit relayif faultyFind on Amazon →

Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.

Step by step

9 steps
  1. Get in the car, close the doors and start the engine. Do not turn on the glass heating with the engine off, or you will drain the battery.
  2. On the climate control panel in the center of the dashboard, find the buttons with the heating icons. The windshield icon is a windshield with wavy arrows pointing up. The rear window and mirror icon is a rectangle with wavy arrows. On some trim levels the buttons are on the multimedia touchscreen, in the climate menu.
  3. Press the windshield heating button. The indicator on the button or the icon on the screen should light up. On the TXL, windshield heating is standard equipment, as is washer nozzle heating.
  4. Press the rear window heating button. Usually the outside mirror heaters switch on together with it. If your trim level has a separate button for the mirrors, press that one too.
  5. To clear frost and fog quickly, set the fan to medium-high speed and direct the airflow at the windshield. Use the defrost mode on the climate panel for this. Turn on the A/C to dry the air.
  6. After a few minutes, check with your palm: the glass and mirrors should feel warm, and ice and frost should melt away. Do not scrape ice off the heated areas with hard scrapers, because you can damage the heating elements.
  7. The heating switches off automatically on a timer. The exact time depends on the trim level. If needed, press the button again to turn the heating off sooner.
  8. Remote preheating: on trim levels with Exeed Connect services, start the engine and the heating from the app ahead of time. The available remote functions depend on the trim level and the app version.
  9. If the indicator is lit but the glass or mirror does not heat up, check the heating fuses using the fuse box diagram for your TXL. Then inspect the connectors on the mirrors. Visually check the rear window grid lines for breaks.

Common mistakes and warnings

  • Do not run the glass heating for a long time with the engine off or with a weak battery
  • Do not apply films or stickers to the heated areas, and do not clean the glass with sharp objects
  • If the heating does not turn on and the fuses are good, the problem is in the wiring or the control module, and it is best to take the car to a repair shop
Spotted a mistake? Tell us →