https://autopapyrus.com/catalog/hyundai/accent/guides/routine-engine-diagnostics/
Hyundai Accent 1.4 16v G4EE (2006): In-Vehicle Engine Diagnostics
This is a routine check plan for the G4EE engine (1.4 L, 97 hp), working from simple to complex: inspection and fluids, reading trouble codes, spark plugs and ignition, fuel and air, then mechanical checks (compression, oil pressure, timing belt). Use it when the engine misfires, the idle hunts, power drops, consumption rises or the Check Engine light comes on.
Key figures
- Oil capacity for an ordinary oil changethis is how much to add after an oil change; total engine capacity is 3.8 L (4.0 qt) (step 3)about 3.3 L (3.5 qt)
- Oil change intervalwhichever comes first (step 5)15,000 km or once a year
- Spark plug replacement intervalmisfires increase when overdue (steps 5 and 12)30,000 km
- Timing belt replacement intervala broken belt can bend the valves (steps 5 and 30)90,000 km
Check these values against the manufacturer’s specification for your vehicle before you start.
Diagram: where the spark plug wells and coil connectors are on the G4EE engine
- 1Spark plug well: four in a row under the coils. With the coils off, look inside: oil in a well means a leak past the valve cover seals.
- 2Black valve cover gasket around the edge: if oil seeps from under it, it runs into the wells and ruins the coil.
- 3Coil connectors: light plugs with latches along the edge of the head. Remove the decorative cover first, then unplug the connectors and take out the coils.
- 4Intake manifold: on the left of the head, a landmark for the inspection.
- 5Valve cover bolts: along the cover edge, a landmark.
Parts
10| № | Part |
|---|---|
| 01 | Spark plugssetFind on Amazon → |
| 02 | Ignition coilif faultyFind on Amazon → |
| 03 | Air filterFind on Amazon → |
| 04 | Fuel filterFind on Amazon → |
| 05 | Coolant temperature sensorif faultyFind on Amazon → |
| 06 | Oxygen (O2) sensorif faultyFind on Amazon → |
| 07 | Crankshaft position sensorif faultyFind on Amazon → |
| 08 | Idle air control valveif faultyFind on Amazon → |
| 09 | Valve cover gasketif faultyFind on Amazon → |
| 10 | Spark plug well sealsif faultyFind on Amazon → |
Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.
Tools
8Read the codes yourself
A scanner plugged into the OBD2 port under the dashboard shows which fault codes the car has stored, before you buy any parts. Cars sold in the US from 1996, and petrol cars in Europe from 2001 (diesels from 2004), have this port.
- Basic code reader, about $20–40: reads and clears engine codes Amazon →
- Bluetooth scanner with a phone app, about $30–100: live sensor data, and on many cars ABS and airbag codes too Amazon →
Check that the scanner lists your make and model year before you buy. We may earn a commission from qualifying purchases.
There's a full repair manual for this car
Every system, wiring diagrams and torque specs — not just this job. Chilton and 5 more.
See manuals →
Step by step
36 steps · 7 stagesStage 1 of 7 Preparation and symptom review 5 steps
- Identify the symptom: hard starting, unstable idle, loss of power, smoke, knocking, overheating. Note when it shows up: on a cold or hot engine, after rain or a car wash, under load. "Misfires and gets worse in damp weather" usually points to the ignition system.
- Park the car on level ground, shut off the engine and let it cool. Open the hood and inspect the engine bay. Look for oil and coolant leaks, cracked or dried-out hoses, disconnected connectors and rodent damage to the wiring.
- Check the oil and coolant levels. Total engine oil capacity is about 3.8 L (4.0 qt), and an ordinary oil change takes about 3.3 L (3.5 qt). Recommended viscosity is SAE 5W-30 or 5W-40. An oil level below normal or very old oil is a common cause of noise and low oil pressure.
- Check the battery voltage with a multimeter: about 12.4-12.7 V with the engine off and 13.8-14.5 V with the engine running. A weak battery and poor terminal connections cause sensor glitches and engine control unit errors.
- Compare against the maintenance intervals: oil every 15,000 km or once a year, air filter every 30,000 km, spark plugs every 30,000 km, fuel filter every 60,000 km, timing belt and drive belt every 90,000 km, coolant every 45,000 km or 3 years. Anything overdue is the first candidate for replacement.
Stage 2 of 7 Reading trouble codes 5 steps
- Locate the diagnostic connector under the dashboard on the driver's side. Connect the scanner with the ignition off.
- Turn the ignition on (do not start the engine) and read the codes. Write down all codes, especially stored ones, and the freeze frame data.
- Do not clear the codes until the diagnostics are finished: clearing them or disconnecting the battery terminals erases data that helps you find the fault.
- Main code groups: P0300-P0304 — misfires (general and by cylinder); P0100-P0115 — air and temperature sensors; P0130-P0141 — oxygen sensor; P0335-P0340 — crankshaft and camshaft position sensors; P0505-P0507 — idle control; P0170-P0175 — mixture too lean or too rich.
- Look at the live data on a warm engine: coolant temperature (should reach operating temperature), fuel trims (close to zero; a constant strong negative or positive value means an air leak or a fuel problem), oxygen sensor voltage (should oscillate).
Stage 3 of 7 Ignition 5 steps
- If there are misfires, remove the decorative cover, disconnect the coil connectors and remove the coils. Inspect the spark plug wells: oil in a well means a leak through the valve cover seals, which will ruin the coil.
- Remove the spark plugs with a spark plug socket. Judge the deposit color: light brown is normal, dry black means a rich mixture, oil-wet means worn valve stem seals or rings, white means a lean mixture or overheating.
- Check the gap with a feeler gauge and compare it with the manufacturer's specification. Replace plugs with heavily worn electrodes or cracked insulators with new ones for the G4EE (equivalents: NGK, Denso, Bosch).
- Thread the plugs in by hand, then tighten with a torque wrench: a guideline is 15-25 N·m (11-18 lb-ft); check the exact value against the manufacturer's specification. Do not overtighten, as it is easy to strip the threads in the aluminum head.
- Check the coil: inspect it for cracks and signs of arcing, and measure the winding resistance with a multimeter against the specification. To test it, swap the coil from the suspect cylinder with one from a neighboring cylinder. If the misfire "moves" with it, the coil is faulty.
Stage 4 of 7 Air and fuel 6 steps
- Inspect the air filter. Replace a heavily clogged one; do not blow it out with compressed air.
- Check the intake ducts and vacuum hoses for cracks. An air leak causes a hunting idle and mixture-related codes. You can find the leak on a running engine by the hissing sound, or by spraying carburetor cleaner on the joints (a change in engine speed points to a leak).
- Inspect the throttle body and the idle air control valve: carbon and dirt cause a hunting or low idle. Clean them with a throttle body cleaner with the ignition off.
- Check the fuel pressure with a gauge on the fuel rail. A pressure drop points to a weak pump, a clogged fuel filter or a faulty regulator. Check the acceptable values against the manufacturer's specification.
- Listen for the fuel pump for 2-3 seconds after turning the ignition on (a hum from the tank). If the pump is silent, check the fuse, the relay and the power supply at the connector.
- If you suspect the injectors, measure the winding resistance with a multimeter and listen for the clicking on a running engine (use a stethoscope or a long screwdriver held to your ear).
Stage 5 of 7 Sensors 4 steps
- Check the coolant temperature sensor: on a cold engine the scanner should show ambient temperature, and on a warm engine about operating temperature. Unrealistic values lead to a rich mixture and poor starting.
- Check the throttle position sensor: the voltage should change smoothly as you press the pedal, with no dropouts.
- Check the crankshaft position sensor: inspect the connector and wiring. If it fails, the engine may not start or may stall while driving. Check the winding resistance and the air gap against the specification.
- Oxygen sensor: on a warm engine, the scanner voltage should switch rapidly within 0.1-0.9 V. Slow, "lazy" oscillations mean the sensor is worn.
Stage 6 of 7 Mechanical checks 8 steps
- Warm up the engine, switch off the ignition, remove all spark plugs, and disable the fuel and ignition (pull the fuel pump fuse and disconnect the coil connectors). Insert the compression tester into a spark plug hole and crank the engine with the starter for 4-5 compression strokes (dry test). Record the value for each cylinder. A spread of more than 10-15% between cylinders, or a low value against the specification, indicates wear.
- If compression is low, pour about 10-20 mL (0.3-0.7 fl oz) of oil into the cylinder and repeat the measurement. If it rises, the rings and pistons are at fault; if it stays low, the valves or the head gasket are at fault.
- Listen to the engine. Hydraulic lifter tapping on a cold engine that disappears after warm-up is normal with old oil. A dull knock that follows engine speed points to the rod or main bearings (check the oil and oil pressure), and timing belt noise points to loose tension, a pulley or the tensioner.
- Check the oil pressure (by the warning light on the dash or with a gauge). If the light comes on at hot idle, check the oil level, the oil pressure sensor, the oil filter and the condition of the oil.
- Inspect the timing belt if the mileage is around 90,000 km or the history is unknown. This is a belt-driven engine, and a broken belt can bend the valves, so if in doubt, replace the belt, pulleys and tensioner as a set.
- Check for engine vibration: inspect the engine and transmission mounts for cracks and play. A damaged mount causes vibration at idle and a knock when shifting.
- Check the cooling system: the level, the thermostat (the upper hose should become hot only after the thermostat opens), the radiator fan (it should switch on as the engine heats up), the radiator cap, and any leaks.
- Inspect the exhaust system: noise, leaks at the manifold, contact with the body. A sharp smell and noise on a cold engine indicate a leak.
Stage 7 of 7 Wrap-up 3 steps
- Reassemble everything, reconnect the coils and reinstall the fuses.
- Clear the trouble codes with the scanner, start the engine and let it warm up to operating temperature. Check that the idle is stable and that there are no leaks.
- Take a 15-20 minute test drive under varying loads, then read the codes again. If the Check Engine light returns, follow up on the new code.
Common mistakes and warnings
- When checking compression and fuel pressure, keep sparks and open flames away; gasoline is a fire hazard
- Disconnect the battery terminals only with the ignition off
- The torque values above are guidelines; check the exact values against the manufacturer's specification
- If the work goes beyond diagnostics (timing belt replacement, cylinder head repair), it is better to go to a repair shop unless you have experience
Spotted a mistake? Tell us →
Our articles
Brand stories
The History of Hyundai
Hyundai Motor Company, whose name means "modernity" in Korean, is South Korea's largest automaker and one of the top…
Read →
Garage
Fuel Quality Indicators: What Octane and Cetane Numbers Mean
What is an octane number? What about a cetane number? Which fuel should you choose for a high-compression engine?…
Read →
Before you buy
How to Pick Up Your Car from the Dealership the Right Way
If you've decided to buy a car from a dealership, it isn't enough to simply choose a model you like, pay for it, and…
Read →