https://autopapyrus.com/catalog/im-motors/ls7/guides/diagnosing-a-rear-suspension-knock/
IM Motors LS7: Diagnosing a Rear Suspension Knock
The IM LS7 is equipped with a Continental adaptive air suspension and Bilstein electronically controlled shock absorbers. A knock from the rear can come from the air springs, shock absorbers, suspension arms, or mounting hardware. Diagnosis starts with a visual inspection on a lift and a check of the air system pressure.
Parts
6| № | Part |
|---|---|
| 01 | Continental air springsif faultyFind on Amazon → |
| 02 | Bilstein DampTronic adaptive shock absorbersif faultyFind on Amazon → |
| 03 | Control arm bushingsif faultyFind on Amazon → |
| 04 | Ball jointsif faultyFind on Amazon → |
| 05 | Sway bar linksif faultyFind on Amazon → |
| 06 | Suspension mountsif faultyFind on Amazon → |
Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.
Tools
5Read the codes yourself
A scanner plugged into the OBD2 port under the dashboard shows which fault codes the car has stored, before you buy any parts. Cars sold in the US from 1996, and petrol cars in Europe from 2001 (diesels from 2004), have this port.
- Basic code reader, about $20–40: reads and clears engine codes Amazon →
- Bluetooth scanner with a phone app, about $30–100: live sensor data, and on many cars ABS and airbag codes too Amazon →
Check that the scanner lists your make and model year before you buy. We may earn a commission from qualifying purchases.
Step by step
10 steps- Raise the vehicle on a lift or position it over an inspection pit, and make sure you have access to the rear suspension.
- Inspect the air springs for cracks, abrasions, and air leaks. If an air spring is damaged, it loses pressure, the shock absorber works without support, and a knock occurs over bumps.
- Check the Bilstein shock absorber mounts, both the upper mount to the body and the lower mount to the control arm. Loose bolts or worn bushings produce a characteristic metallic knock.
- Check the bushings of the trailing and lateral rear suspension arms. Use a pry bar to move the arms. There should be no play. Worn bushings cause a dull knock over bumps and during acceleration and braking.
- Inspect the sway bar links. Move each one by hand. Play indicates worn bushings or deteriorated rubber elements.
- Check the tightness of the bolts that secure the suspension components to the subframe and body. Partially loosened bolts or increased gaps at the mounting points cause a knock.
- Turn the ignition on and activate the body raise/lower function through the infotainment system, and listen to the air suspension compressor. Excessive noise, prolonged running, or clicking indicates a leak in the system or a faulty compressor.
- Inspect the rear exhaust system. Make sure the muffler and resonator do not touch the body or suspension parts, especially when you rock the vehicle.
- Check the rear brake calipers. Worn guide pins or uneven pad wear can cause a knock during braking and over bumps.
- Bounce the body by hand at each corner. The shock absorbers should damp the motion within 1-2 cycles. If the body keeps bouncing or you hear knocks, the shock absorbers are worn or the DampTronic system is faulty.
Common mistakes and warnings
- The IM LS7 is a high-voltage electric vehicle
- When working under the vehicle, be careful around high-voltage cables (orange insulation)
- Do not work on the high-voltage circuit without special training and 1000 V insulated gloves
- The Continental adaptive air suspension and the Bilstein DampTronic system are complex, electronically controlled assemblies
- If your diagnosis points to a fault in the electronic components (level sensors, air suspension control unit, shock absorber solenoid valves), take the vehicle to an authorized IM Motors service center for diagnosis with factory equipment
- You can replace the air springs and shock absorbers yourself if you have suspension experience, but calibrating the system after replacement requires dealer software
How it works · 3D
How Car Suspension Works
How the part you're working on actually works — in plain English, on a 3D model.
Open in 3D →