Autopapyrus · Mazda 6 2.0 SkyActiv-G PE-VPS (2016)
https://autopapyrus.com/catalog/mazda/6/guides/battery-replacement/
https://autopapyrus.com/catalog/mazda/6/guides/battery-replacement/
Compiled automatically from service literature and owner experience. Specs are for the typical configuration — check them against your exact car before you start.
Mazda 6 2.0 SkyActiv-G PE-VPS (2016): Battery Replacement
The battery on the Mazda 6 (GJ, third generation) is located in the engine bay on the left side and is held down by a clamp. Replacement does not require removing the underbody (engine) shield and takes about twenty minutes. The procedure is standard: disconnect the terminals (negative first, then positive), remove the old battery, and install the new one.
Part
| № | Part | Alternatives |
|---|---|---|
| 01 | Battery 12V 60 AhFind on Amazon → | AlternativesBosch S4 60 AhVarta Blue |
Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.
Tools
3
There's a full repair manual for this car
Every system, wiring diagrams and torque specs — not just this job. Haynes and 4 more.
See manuals →
Step by step
9 steps- Open the hood and find the black plastic battery case to the left of the engine.
- Disconnect the NEGATIVE terminal (black cable) first: loosen the 10 mm bolt on the terminal and remove the terminal.
- Disconnect the POSITIVE terminal (red cable): loosen the 12 mm bolt and remove the terminal.
- Loosen the hold-down clamp bolt (10 mm) and lift the clamp up.
- Lift out the old battery with both hands (about 15 kg (33 lb)) and set it down in a safe place.
- Wipe the battery tray with a rag and remove any corrosion.
- Set the new battery in place, lower the hold-down clamp, and tighten the bolt.
- Connect the POSITIVE terminal (red cable) first: tighten the 12 mm bolt. Then connect the NEGATIVE terminal (black cable): tighten the 10 mm bolt.
- Close the hood. Press the brake pedal and make sure the brake lights come on and the instrument cluster lights up normally.
Common mistakes and warnings
- Always disconnect the negative terminal FIRST and reconnect it LAST
- This prevents short circuits
- If the car has Traffic Sign Recognition active, the camera may need to be recalibrated at a repair shop using diagnostic equipment
Spotted a mistake? Tell us →
Our articles
Brand stories
The History of Mazda
It's hard to find anyone today who would dispute that cars from the Japanese company Mazda are among the most beautiful…
Read →
Garage
Fuel Quality Indicators: What Octane and Cetane Numbers Mean
What is an octane number? What about a cetane number? Which fuel should you choose for a high-compression engine?…
Read →
Before you buy
How to Pick Up Your Car from the Dealership the Right Way
If you've decided to buy a car from a dealership, it isn't enough to simply choose a model you like, pay for it, and…
Read →