← Terrano Nissan Terrano repair manuals →

Nissan Terrano (2018): Where to Find the Cigarette Lighter Fuse

The third-generation Terrano (D10) is built on the Renault Duster platform. The cigarette lighter fuse is in the interior fuse box, at the driver's-side end of the dashboard. Depending on trim level, it is F33 (20 A) or F38 (15 A). The under-hood fuse box is not part of the lighter circuit.

DifficultyEasy Time10-15 minutes Steps12

Key figures

  • Cigarette lighter fuse, option 1
    F33, 20 A. Find it in the interior fuse box (step 5) and replace it only with a fuse of the same amperage
  • Cigarette lighter fuse, option 2
    F38, 15 A. Located in the same box and also powers the radio (step 5); replace it only with a 15 A fuse

Check these values against the manufacturer’s specification for your vehicle before you start.

Diagram: where the cigarette lighter fuse is and how to find it

View of the driver-side end of the dashboard and the interior fuse blockcover is dark, like the panelback side of the cover1Driver's door2Protective cover4Layout on the inside of the cover3Interior, not under-hood5Fuse 20 A / 15 Areplace only with the same amperageF33 yellow 20 A, F38 light blue 15 ATap to enlarge
  1. 1Driver's door: open it, the block is in the end of the dashboard that the door covers.
  2. 2Protective cover: gently pry the edge with a flat plastic tool and remove it, the plastic is fragile.
  3. 3Interior fuse block behind the cover. The under-hood block is not related to the cigarette lighter.
  4. 4Fuse layout on the back of the cover: use it to find the right fuse, the layout depends on trim.
  5. 5Cigarette lighter fuse: F33 20 A or F38 15 A, a small flat fuse in the row of small ones. Pull it with the puller and replace only with the same amperage.

Parts

2
№Part
01 20 A blade fusefor trims with a 20 A fuse; use the same amperage as the blown oneFind on Amazon →
02 15 A blade fusefor trims with a 15 A fuse; use the same amperage as the blown oneFind on Amazon →

Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.

Tools

3
There's a full repair manual for this car Every system, wiring diagrams and torque specs — not just this job. Haynes AutoFix (online). See manuals →

Step by step

12 steps
  1. Turn off the engine, remove the key from the ignition, and unplug everything from the cigarette lighter socket (charger, dash cam, compressor).
  2. Open the driver's door. The interior fuse box is at the end of the dashboard that the door covers. It is hidden behind a plastic cover.
  3. Carefully pry up the edge and remove the protective cover. The plastic is brittle, so use a flat plastic tool and do not force it with a screwdriver.
  4. Look at the back of the cover: the fuse box diagram is printed there. The number of fuses and their layout depend on trim level, so go by the diagram.
  5. Find the cigarette lighter fuse. Option 1: F33, 20 A, labeled "Cigarette lighter". Option 2: F38, 15 A. It also powers the radio from the ignition switch, so if it blows, the radio may lose power along with the lighter.
  6. If the diagram shows neither F33 nor F38, look for the position labeled "Cigarette lighter" or marked with a lighter symbol and go by that.
  7. Pull the fuse out with the puller, straight toward you without twisting. Hold it up to the light: in a blown fuse, the wire inside the clear housing is broken.
  8. Push in a new fuse of the same rating (20 A for F33, 15 A for F38) all the way. Never install a higher-rated fuse: the wiring can overheat.
  9. Insert the key, turn the ignition on, and test the lighter or the charger in the socket.
  10. If the new fuse blows right away, there is a short circuit in the socket: either the device plugged into it is faulty, or a coin or metal object is stuck in the socket. Check the socket with the ignition off, without inserting anything metal into it.
  11. If the fuse is intact but the socket does not work, try another device. If that does not work either, the problem is in the socket itself, its connector, or the wiring. That is the next stage of diagnosis.
  12. Snap the protective cover back into place.

Common mistakes and warnings

  • Do all work with the ignition off
  • Do not replace the fuse with wire or foil, and do not install a higher-rated fuse
  • This is a wiring fire risk
  • The rear socket and the cargo area socket use different fuses, located in other fuse boxes
Spotted a mistake? Tell us →

Our articles

More articles →