Autopapyrus · Renault Express (2021)
https://autopapyrus.com/catalog/renault/express/guides/replacing-the-low-high-beam-bulb-in-the-headlight/
https://autopapyrus.com/catalog/renault/express/guides/replacing-the-low-high-beam-bulb-in-the-headlight/
Compiled automatically from service literature and owner experience. Specs are for the typical configuration — check them against your exact car before you start.
Renault Express (2021): Replacing the Low/High Beam Bulb in the Headlight
The Renault Express headlight uses H7 bulbs for both low beam and high beam. Each bulb has its own cover: low beam is under cover A, high beam is under cover B. The position lights and daytime running lights are LEDs and are not user-serviceable. The 2021 model year is the Express (Kangoo III). Replace the bulb in the headlight where it has burned out, or preferably both at once so the light output matches.
Key figures
- Low beam and high beam bulb typethis is the bulb to buy for replacement (step 3)H7, 55 W
- UV protectionwithout it, the headlight plastic may be damaged (step 3)required for high beam bulbs
Check these values against the manufacturer’s specification for your vehicle before you start.
Diagram: where the bulb covers and sockets are in the headlight and how to take them out
Tap to enlarge
- 1Cover A protects the low beam bulb. Take it off (nothing to unscrew); move obstructing parts aside by hand. Refit it tightly after the change.
- 2Cover B protects the high beam bulb. Take it off the same way and refit it tightly afterwards.
- 3Low beam bulb socket with the H7 bulb. Note the bulb position, slide the socket to unlatch it and pull the bulb out together with it.
- 4High beam bulb socket under cover B. Slide it the same way and pull the bulb out.
- 5Electrical connector on the socket: if there is one, unplug it.
Part
| № | Part | Alternatives |
|---|---|---|
| 01 | H7 halogen bulb, 12 V, 55 W, with UV protectionfor low beam and high beamFind on Amazon → | AlternativesOsramPhilipsBosch |
Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.
There's a full repair manual for this car
Every system, wiring diagrams and torque specs — not just this job. Haynes AutoFix (online).
See manuals →
Step by step
16 steps · 4 stagesStage 1 of 4 Preparation 3 steps
- Turn off the engine, switch off the ignition and the lights. Let the bulbs cool down. Everything near the engine can be hot, and the cooling fan can start at any moment, so keep your hands and tools away from it.
- Park the car on level ground and open the hood. Determine which bulb is out: low beam or high beam.
- Buy an H7 bulb with UV protection, 55 W. High beam bulbs must be this type, otherwise the headlight plastic may be damaged.
Stage 2 of 4 Replacing the low beam bulb 6 steps
- Remove cover A, which covers the low beam bulb. If neighboring parts are in the way, gently move them aside by hand. Nothing needs to be unscrewed.
- Before removing the bulb, memorize or photograph its position in the headlight so the new one goes in the same way.
- Slide the bulb holder (item 3 in the owner's manual) to release it, and pull out the bulb together with the holder. If the holder has an electrical connector, disconnect it.
- Replace the H7 bulb. Handle it only by the base and do not touch the glass. If you leave a fingerprint, wipe the glass with a cloth and rubbing alcohol.
- Install the bulb in its original position and snap the holder into place.
- Put cover A back on and make sure it is seated tightly around the entire edge: no moisture should get into the headlight through it.
Stage 3 of 4 Replacing the high beam bulb 4 steps
- Remove cover B, which covers the high beam bulb.
- Note the bulb's position, then slide the holder (item 1 in the owner's manual) to release it and pull out the bulb. Disconnect the connector if necessary.
- Replace the H7 bulb (UV protection, 55 W), holding it by the base without touching the glass.
- Install the bulb in its original position, snap the holder into place, put cover B back on, and check that it is seated tightly.
Stage 4 of 4 Checking 3 steps
- Switch on the ignition, then the low beam and high beam. Make sure both bulbs light up.
- Check that there are no stray parts in the headlight and that the covers are not loose.
- After replacing the low beam bulb, check the headlight aim. The manufacturer recommends having this done by a professional.
Common mistakes and warnings
- Bulbs are pressurized and can shatter during replacement, so work carefully, preferably wearing gloves and safety glasses
- Do not touch the glass with your fingers: skin oils shorten the bulb's life
- Have any changes to the electrical system, including installing LED bulbs in place of H7, done by an authorized dealer: incorrect wiring can damage the electrical system
- Replacement of the LED position lights and daytime running lights should also be done by a dealer
- If the bulb doesn't light after replacement, check the fuse and how the holder is seated
Spotted a mistake? Tell us →
Our articles
Brand stories
The History of Renault
Louis Renault (1877–1944) was interested in electricity and mechanics from an early age, and he was destined to become…
Read →
Garage
Fuel Quality Indicators: What Octane and Cetane Numbers Mean
What is an octane number? What about a cetane number? Which fuel should you choose for a high-compression engine?…
Read →
Before you buy
How to Pick Up Your Car from the Dealership the Right Way
If you've decided to buy a car from a dealership, it isn't enough to simply choose a model you like, pay for it, and…
Read →