← Chevrolet

Chevrolet Captiva 2011 automatic transmission problems

Chevrolet Captiva · 2011 11 answers Translated from Russian · original

I've started working on automatic transmissions and don't have much experience yet, so please go easy on me. The car is a Chevrolet Captiva, 167 hp, 2011. The transmission shows fault code P0776 (solenoid valve 2 stuck closed). Is the problem only the valve, so that replacing it will fix it, or could there be something else? Mileage is 60000 km. The oil was changed at 50000 km. I haven't drained the oil yet, so I can't say anything about its color or smell. 1st, 2nd and 3rd gears work, but it won't shift any higher. Reverse is missing. There are no unusual noises from the gearbox. Thanks in advance for your help.

Answers
O
Owner Jul 15, 2020

Try clicking the valves directly from the ECU connector. Listen to how they work and measure the current draw. That will let you draw some conclusions. I've sent you a couple of links in a private message to help.

O
Owner Aug 05, 2020

What was it? Please report back.

O
Owner Sep 18, 2020

The thread can be closed. The plan is to replace the valve body plate and do an adaptation through Open Port.

O
Owner Oct 05, 2020

What happened to the plate? Wasn't the automatic transmission opened up?

O
Owner May 02, 2021

Most likely the wavy disc broke and the retainer of the 3-5-R clutch failed (the code, P0776, relates to exactly this clutch). If you drain the oil, you may not see any metal shavings. You need to remove the valve cover, and if it's full of shavings, the transmission has to be disassembled. Valve bodies rarely failed, and if one did, it was a consequence of the 3-5-R clutch failure.

O
Owner Aug 14, 2021

Valuable information, thanks. Removing the pan will show.

O
Owner Aug 28, 2021

I removed the plastic cover. In the corners, on the walls, there is very fine metal shavings that can't drain off with the oil. We will remove the transmission and take it apart.

O
Owner Sep 16, 2021

That's right: "The wavy disc broke and the retainer of the 3-5-R clutch failed (the code, P0776, relates to exactly this clutch). If you drain the oil, you may not see any metal shavings. You need to remove the valve cover, and if it's full of shavings, the transmission has to be disassembled. Valve bodies rarely failed, and if one did, it was a consequence of the 3-5-R clutch failure."

O
Owner Nov 03, 2021

There were also problems with the bolts of the power take-off flange to the transfer case. The bolts were either over-hardened or tightened with too much torque, I don't remember which. There were several cases where the heads were torn off, with serious consequences. Since the transmission is already disassembled, it may be worth replacing them just in case. Maybe I'm overthinking it, and others can advise.

O
Owner Dec 08, 2021

Clutch drum, sun gear, wavy (spring) disc, backing plate, piston, snap ring, valve plate. Kit: gasket, seals, and oil seals.

O
Owner Mar 31, 2022

Moderator, please close the thread.

This discussion took place in the Russian-language Autopapyrus community and was translated automatically; owners' names are left out. Asking and answering on autopapyrus.com opens soon. Need step-by-step instructions now? Build a guide for your car →