← Nissan

Nissan Tiida 2007, 1.6 L 16V HR16 misfiring on two or three cylinders

Nissan Tiida · 2007 8 answers Translated from Russian · original

Car: Nissan Tiida 2007, 1.6 L 16V HR16, VIN 3N1FCAC11UK398860, automatic transmission, mileage 55 thousand km. It starts very badly when cold, runs on two or three cylinders, misfires and stalls. There are no engine fault codes at all. I'm looking for any information on this car. I managed to get the spark plugs out with difficulty (they come out with a 14 socket). I tried to measure compression but couldn't. Are the valves adjustable on this car, or does it have hydraulic lifters? The car has 4th-generation LPG (gas) equipment with sequential injection, installed 4 months ago. The problems started a week ago. Thanks.

Answers
O
Owner Apr 09, 2020

Check the engine temperature in the live data; the coolant temperature sensor may be giving false readings.

O
Owner May 19, 2020

The coolant temperature sensor reads correctly and isn't lying.

O
Owner Jun 15, 2020

If it has LPG, I would check the injectors first. Also, maybe the self-learning fuel correction has drifted?

O
Owner Sep 26, 2020

Fuel, injectors, the high-voltage part, and also compression.

O
Owner Oct 27, 2020

The MAF sensor readings were from a QG15; they take the MAF into account at start-up. Disconnecting it makes no difference.

O
Owner Jan 22, 2021

It misfires the same way on petrol and on gas, so I rule out the fuel. The high-voltage part is possible, but the coils are individual and can't be reached with the assembly in place, because the intake manifold covers everything. Vartan was right about Nissan. I managed to measure compression: cylinders 1 and 3 give 4 bar, cylinders 2 and 4 give 12 bar. I had only seen spark plugs this thin on Honda motorcycles, so I had to make adapters. The engine spins up very well, though. Does it have VVT? There is a sensor on the left, but it may be a phase sensor. I can only guess. Are the valves adjustable on this car, or are there hydraulic lifters? If hydraulic, it looks like the head will have to be opened up. I wonder whether it has a chain or a belt. I couldn't find out, because everything is covered by the valve cover (I conclude it's a chain).

O
Owner May 28, 2022

I dug through a search. The Tiida and Versa are the same, and the HR16 engine is also fitted to the Nissan Note. The engine has a chain. The valves are checked hot and adjusted with shims. Compression on this engine is 12.6 bar, compression ratio 10.5.

O
Owner Jun 18, 2022

Pour a few cc of oil into the cylinders and measure compression again. If it rises, it's the rings; if not, it's the valves. Most likely the valves are burnt. Set the cold-adjustment clearance 0.04 smaller. It seems the head can't be avoided being opened.

This discussion took place in the Russian-language Autopapyrus community and was translated automatically; owners' names are left out. Asking and answering on autopapyrus.com opens soon. Need step-by-step instructions now? Build a guide for your car →