← Korando

KGM Korando (4th generation): OBD-II Diagnostics

OBD-II (On-Board Diagnostics) is the vehicle's standard self-diagnostic system. Through the 16-pin connector you can read diagnostic trouble codes (DTCs), view live data (RPM, temperature, fuel consumption), and check system readiness for an emissions inspection. The 4th-generation KGM Korando (2019 and newer) supports the OBD-II/EOBD protocols.

DifficultyEasy Time5-10 minutes Steps7

Part

№Part
01 not requiredFind on Amazon →

Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.

Tools

2
  • OBD-II adapter (ELM327 Bluetooth/Wi-Fi or a professional scan tool) Amazon →
  • smartphone/tablet/laptop with a diagnostic app Amazon →

Read the codes yourself

A scanner plugged into the OBD2 port under the dashboard shows which fault codes the car has stored, before you buy any parts. Cars sold in the US from 1996, and petrol cars in Europe from 2001 (diesels from 2004), have this port.

  • Basic code reader, about $20–40: reads and clears engine codes Amazon →
  • Bluetooth scanner with a phone app, about $30–100: live sensor data, and on many cars ABS and airbag codes too Amazon →

Check that the scanner lists your make and model year before you buy. We may earn a commission from qualifying purchases.

Step by step

7 steps
  1. Locate the OBD-II diagnostic port. It is inside the cabin above the pedals on the driver's side, with the socket facing down. It may be covered by a cap (remove it by hand).
  2. Plug the ELM327 adapter (or professional scan tool) into the port until it clicks. Turn the ignition on (you don't need to start the engine; the ON position is enough to read codes).
  3. On your smartphone/tablet, turn on Bluetooth or Wi-Fi and connect to the adapter (the default PIN is 1234 or 0000). Apps that work with ELM327 include Torque Pro, Car Scanner ELM OBD2 and OBD Auto Doctor (for iOS, EOBD Facile).
  4. Launch the app and wait for it to establish a connection with the vehicle (usually 5-10 seconds). Select "Read Fault Codes" / "Check DTC".
  5. The app will display trouble codes in the format P0XXX (powertrain: engine and transmission), C0XXX (chassis: suspension, brakes), B0XXX (body systems), U0XXX (network: communication between modules). Write down the codes and their descriptions.
  6. To view live data, select "Dashboard" / "Real-time data" in the menu. Available parameters include RPM, coolant temperature, engine load, throttle position, boost pressure (for the 1.5T G15TF turbo engine), oxygen sensor, and fuel consumption.
  7. After fixing the problem, clear the codes using "Clear Codes". Drive 50-100 km (31-62 miles) to complete a full self-diagnostic cycle. If the problem is fixed, the code will not return and the Check Engine light will stay off.

Common mistakes and warnings

  • A trouble code points to a symptom, not a specific part
  • For example, P0420 (catalyst system efficiency below threshold) can be caused by a faulty oxygen sensor, a failed catalytic converter, or an air leak in the exhaust
  • For accurate diagnosis of complex faults (especially the ABS, airbag and transmission systems), contact an official KGM dealer
  • They have access to extended protocols and adaptations that are not visible through standard OBD-II
Spotted a mistake? Tell us →