← Chery

Chery Kimo 2011 – engine speed drops while driving

Chery Kimo · 2011 9 answers Translated from Russian · original

A Chery Kimo came in. The mechanic spent about half an hour on it, and it was rebooked for Saturday. The problem is that engine speed drops while driving. Let me explain it more clearly. Engine 1.3, ECU ME7.9.7, electronic throttle. We got in, connected a scanner and drove off. The car accelerates briskly, the ECU sees the accelerator pedal press and the throttle opens. Near the service shop there is a small hill, and when we press the pedal harder, the ECU sees the press, but the desired throttle position drops to about 2.5%. The actual position follows it (engine speed falls). To avoid stalling we press the clutch and roll back down the hill in reverse, holding the accelerator pedal down. The ECU sees this but does not open the throttle. Playing with the clutch pedal gives no reaction. Releasing the accelerator pedal by 10-15% and pressing it again gives no reaction either. When we release the accelerator pedal completely and press it again, engine speed rises (the throttle opens). The car is new, with under 2000 km. The owner drove it like this: he drives along, engine speed starts to fall, he presses the clutch, blips the throttle and carries on. Does anyone have ideas? What should be checked? There were no fault codes at the time of the inspection.

Answers
O
Owner Jun 23, 2020

Check the grounds and the power supply to the throttle. With the engine running, wiggle the wiring harnesses, especially the one going to the throttle.

O
Owner Jul 12, 2020

I checked the grounds. I did not check the power supply. I sprayed the connectors with WD-40 and pulled on the harnesses with no reaction. A colleague sat in the car while I pulled them. I also doubt the problem is a bad contact, because the car does not jerk or stall. It seems to fade out. The ECU is clearly closing the throttle itself. What could cause this behavior?

O
Owner Aug 05, 2020

Maybe ESP (if fitted) sees wheel slip. Check the rotation speed of the driven wheels, as one option.

O
Owner Sep 10, 2020

Check that the speed sensor readings are plausible. Also check the switches on the clutch and brake pedals.

O
Owner Nov 15, 2020

If there are no faults, take a drive with a test lamp connected to the pedal power supply, right at the throttle, and to the ECU power supply. I think the picture will be clearer then.

O
Owner Feb 09, 2021

This car has no ESP, only ABS. It sees the wheel rotation. I looked with AutoAs, which shows the ADC values. It does not look like anything is dropping out at the throttle. It looks like the ECU itself is closing it. Thanks, I was thinking the same. At the time of the visit I only had my own AutoAs scan tool. The Kingtek KT-300 had been given to another shop and has now come back safely. AutoAs did not show those parameters. The switches were in place, although the clutch switch was not adjusted, and I adjusted it, but nothing changed.

O
Owner Apr 18, 2021

The car is back. Fault 0571, cruise control brake switch. I adjusted the switch slightly and we drove it ourselves. The fault did not appear. We are waiting for the customer. There is of course no cruise control on this car. There were no ABS faults.

O
Owner Jun 09, 2021

The problem is solved and the customer is happy. The thread can be closed.

O
Owner Sep 07, 2022

The switch under the brake pedal is A21-370001.

This discussion took place in the Russian-language Autopapyrus community and was translated automatically; owners' names are left out. Asking and answering on autopapyrus.com opens soon. Need step-by-step instructions now? Build a guide for your car →