← Opel

Opel Zafira B Easytronic problem

Opel Zafira 12 answers Translated from Russian · original

Hello everyone. I have an Opel Zafira B in the shop with the following problem: when hot, an F lights up on the instrument cluster and the car won't move. After it stands and cools down, everything returns to normal. The only fault code present is P1609, clutch sensor malfunction. We opened up the small motor (actuator); the brushes had already been replaced, and we replaced the brushes again. It ran all day with no problems. By the evening everything came back, along with fault code P1609. Has anyone run into this?

Answers
O
Owner Sep 09, 2020

So the fault is for the rod travel sensor, right? What do the brushes have to do with it? Are the travel values in the live data reasonable? Does it pass the test?

O
Owner Sep 21, 2020

The values are reasonable. It can run for a whole day with no problems.

O
Owner Oct 28, 2020

Hello. The symptom points to clutch overheating. Check that the engine data readings are reasonable, bleed the hydraulic part, and run the "self-movement" test. And don't do anything unnecessary until you find the fault, because here it generally won't work out.

O
Owner Nov 12, 2020

What did this start with? Was it not after a clutch replacement?

O
Owner Dec 05, 2020

Yes, the clutch is new.

O
Owner Jun 04, 2021

Then bleed it and adapt it. The bleeding doesn't always complete fully the first time. The procedure needs to be done at least twice, then teach the actuators and the biting point.

O
Owner Oct 09, 2021

Or maybe check the sensor, wipe the contacts with a little alcohol and so on. After all the other unrelated steps, of course. You could also change the gearbox oil first, for example.

O
Owner Oct 27, 2021

There are many different clutches. The XER and XEP differ. I have also seen more than once that, to save money, people fitted one from a manual gearbox. That won't work. Do you have the part number that was installed? I can check by VIN whether it fits.

O
Owner May 24, 2022

The part number is 621 3043 09. I bled and adapted everything. On the highway you drive and there are no problems. In city traffic jams, problems appear when it heats up.

O
Owner Jul 04, 2022

Was there air in the hydraulics (bubbles)? P1609: clutch position sensor malfunction, signal out of range.

O
Owner Aug 03, 2022

You are a very interesting person. I can see the part number. How am I supposed to find out whether it fits your car?

O
Owner Sep 08, 2022

With P1609, air doesn't matter. Even if the system is empty, the travel is tracked normally. One interesting case: the teeth on the worm wheel were partly stripped. It worked intermittently. The command went to the motor, but the rod did not move by the required amount. Or else the sensor is faulty, but I haven't come across that. It is non-contact there.

This discussion took place in the Russian-language Autopapyrus community and was translated automatically; owners' names are left out. Asking and answering on autopapyrus.com opens soon. Need step-by-step instructions now? Build a guide for your car →