Pajero Sport 2.5 TDI, AT, 2010: how to code the injectors
What tool can be used to code the injectors? Launch iDiag didn't work, and MUT3 couldn't code them either.
I write and calibrate the SCV and small injection with a Carman VCI. The original MUT3 definitely does it. Maybe the injectors are the wrong ones?
The injectors seem to be the right ones. The old ones started with 97, the new ones with 93, 30 characters as they should be.
Even Delphi can do it.
Can it, or have you actually done it? Those are two different things.
G-scan! Of everything I've tried, only that one works. This applies to both Mitsubishi and Nissan with Denso ECUs. On a Mitsubishi, for example, Launch simply won't write the injectors, while on Nissans it also erases them. I have to get a G-scan just so the car can drive away.
Launch writes them everywhere, I've checked.
Where 91 injectors were fitted, 92 won't code. Whose fault it is can be settled quickly by coding the number of any injector to the neighboring cylinder. If it codes, replace the injectors with ones that match the engine. If it doesn't, the problem is with the scanner or with a tuned ECU.
Why does the expert keep blaming tuned ECUs? I write injectors into tuned ECUs without any problems with SD, Launch and Delphi. I don't understand what people are smoking about tuned ECUs.
No! Checked! Either specify exactly which Launch, and which module version.
So as not to create more threads: my Denso injectors won't code. The original ones go in without problems, but the Denso numbers won't go in at all. The number of bytes is the same on both.
I coded Denso myself and everything went fine. The Denso numbers were selected to match the original injectors by VIN.