Misfires detected on a 2012 Volkswagen Tiguan 2.0 TSI
There is a misfire in cylinder 4. It only appears on a cold start. According to the owner, after the car has been parked and the engine is started, it runs rough (misfires) and the check engine light comes on. It runs rough for exactly one minute, then runs normally. I changed the spark plugs and the error remained. I swapped the ignition coils around and got the same result. The misfire is only ever in cylinder 4. I connect the diagnostic tool and clear the errors, and in the live parameters with the engine running there are no misfires. The engine runs smoothly. This repeats until the next morning. What could the problem be? Could it be an injector? I would swap them around, but I have never dealt with these engines, and getting to the injectors is not very easy. Also, I noticed that the misfire counter registers misfires in several cylinders right after startup, and then they disappear. Is that how it should be?
There should be no misfires. These engines are "famous" for their injectors, and cleaning usually helps. You can check the fuel trims, which are usually too high.
One more question: I want to clean them with Wynn's. Where do I connect to the fuel line?
You won't believe it, someone told me a method: connect after (!) the high-pressure fuel pump. I didn't know about it. I tried it and you really can do it, and nothing happens to the seal in the high-pressure fuel pump. The metal tube (with a flared end for a ball seat) is unscrewed from the high-pressure fuel pump and bent aside, a hose is put on it, and only 5 atm of pressure is applied (it doesn't need any 40 atm at idle). The pressure goes straight to the injectors. This is all possible if you can bend the tube aside conveniently enough. Everything gets cleaned well.
Could you clarify, for everyone and for the author, which injectors exactly you are talking about?
It seems we are talking about the fuel system... I don't understand the point of the question.
This is a Tiguan! Then the question is closed. It's all simple here!
Hi. Are there any cases of the high-pressure fuel pump seal being damaged by flushing fluid?? And if you connect after the high-pressure fuel pump, the pump itself will be running idle, without fuel. Won't it be ruined by running dry like that... It isn't cooled or lubricated...
You'd better believe it! There are always plenty of "advisers" around...