← Focus Ford Focus repair manuals →

Ford Focus 1.6 Duratec Ti-VCT (2011): Air Filter Replacement

The air filter on a Ford Focus III with the 1.6 Duratec Ti-VCT engine should be replaced every 15,000-20,000 km (about 9,000-12,500 miles) or once a year. The job takes 10 minutes and requires no special tools.

DifficultyEasy Time10 minutes Steps8 ToolsScrewdriver or 7-8 mm socket

Part

№PartAlternatives
01 Air filter FordFind on Amazon → AlternativesMannMahleBoschFiltron

Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.

There's a full repair manual for this car Every system, wiring diagrams and torque specs — not just this job. Haynes and 25 more. See manuals →

Step by step

8 steps
  1. Open the hood and locate the black air filter housing to the right of the engine.
  2. Remove the four self-tapping screws holding the housing cover using a screwdriver or a 7-8 mm socket.
  3. Remove the filter housing cover.
  4. Grip the old filter by its right side and pull it upward and slightly to the right to remove it.
  5. Clean the filter housing of dust and debris with a vacuum cleaner or a dry rag. Cover the mass air flow sensor with a clean cloth while cleaning.
  6. Install the new filter, aligning the tab on the filter element with the slot in the housing.
  7. Install the housing cover and tighten the four self-tapping screws without excessive force.
  8. Close the hood.

Common mistakes and warnings

  • Do not try to reuse the old filter after blowing it out with compressed air
  • It loses its filtering properties
  • Use only a new, certified filter to protect the engine's service life
Spotted a mistake? Tell us →

Our articles

More articles →