← Solaris

Hyundai Solaris (Accent) 1.6 G4FC (2013): Wiper Blade Replacement

The first-generation Solaris (2010-2017) uses standard wiper arms with a hook-type blade connection. The blades can be replaced without tools, and the procedure is very simple.

DifficultyEasy Time5-10 minutes Steps6 ToolsNone required

Parts

2
№PartAlternatives
01 Hyundai front wiper blades (pair)Find on Amazon → AlternativesBosch TwinSWFDenso
02 Universal wiper blades, 650 mm (driver) and 400 mm (passenger)instead of OEFind on Amazon → AlternativesBosch TwinSWFDenso

Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.

Step by step

6 steps
  1. Open the hood.
  2. For the driver-side front blade: lift the wiper arm all the way up until it stops, then release the blade from the arm (plastic retaining tab on top of the arm).
  3. Slide the new blade onto the arm until it clicks into place. It should fit snugly, but not too tight.
  4. Lower the wiper arm back onto the windshield.
  5. Repeat for the passenger-side blade (right side, same procedure).
  6. If the blade does not come off on the first try, make sure the wiper arm is lifted all the way up and lightly press the retaining tab with your finger. Check: Turn on the washer and wipers (multifunction stalk). The blades should glide evenly, without jerking or squeaking. If they squeak, wipe the blades and the windshield with a damp cloth.

Common mistakes and warnings

  • Do not buy very cheap wiper blades
  • They wear out quickly, often within a single season
  • For winter, a winter-type blade (with a protective cover) and a winter-grade washer fluid that resists freezing are recommended
Spotted a mistake? Tell us →

Our articles

More articles →