https://autopapyrus.com/catalog/hyundai/tucson/guides/a8lf2-automatic-transmission-fluid-change/
Hyundai Tucson 2.0 CRDi (2022): A8LF2 Automatic Transmission Fluid Change
The A8LF2 is an 8-speed hydromechanical automatic transmission. It is considered maintenance-free only on paper. In practice, the fluid is changed about every 50,000-60,000 km. This is a partial change: part of the fluid is drained, then the level is set through the check hole at a specified transmission temperature. The key points of this job are an exact fluid level and the correct temperature window.
Parts
5| № | Part | Genuine part no. |
|---|---|---|
| 01 | ATF SP-IV-RR transmission fluid for Hyundai/Kia 8-speed automaticabout 5-6 L (5.3-6.3 qt), including reserveFind on Amazon → | |
| 02 | Automatic transmission drain plug sealing washer1 pcFind on Amazon → | |
| 03 | Automatic transmission check plug sealing washer1 pcFind on Amazon → | 43838-3B010 |
| 04 | Transmission pan gasket or sealantwhen the pan is openedFind on Amazon → | |
| 05 | Automatic transmission filterwhen the pan is opened, as neededFind on Amazon → |
Amazon links search by the part name and genuine number; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.
Part numbers are from the manufacturer's original catalogue. Check them against your VIN before ordering.
Tools
8- Lift or inspection pit Amazon →
- wrench or hex bit for the drain plug and the level (check) plug (verify the size on the vehicle) Amazon →
- torque wrench Amazon →
- tube or pump syringe for filling through the check hole Amazon →
- 10 L (10.6 qt) measuring container Amazon →
- thermometer or OBD scan tool showing transmission temperature Amazon →
- rags Amazon →
- gloves Amazon →
Read the codes yourself
A scanner plugged into the OBD2 port under the dashboard shows which fault codes the car has stored, before you buy any parts. Cars sold in the US from 1996, and petrol cars in Europe from 2001 (diesels from 2004), have this port.
- Basic code reader, about $20–40: reads and clears engine codes Amazon →
- Bluetooth scanner with a phone app, about $30–100: live sensor data, and on many cars ABS and airbag codes too Amazon →
Check that the scanner lists your make and model year before you buy. We may earn a commission from qualifying purchases.
There's a full repair manual for this car
Every system, wiring diagrams and torque specs — not just this job. Haynes AutoFix (online) and 2 more.
See manuals →
Step by step
10 steps- Warm up the transmission with a short drive, then park the vehicle on level ground, on a lift or over a pit. Shut off the engine and remove the underbody shield if it covers the pan.
- Place a drain container under the pan, remove the drain plug in the pan and drain the fluid. Remember or measure the volume of drained fluid: you need to refill about the same amount. A partial change usually renews about 4-5 L (4.2-5.3 qt) out of a total system capacity of about 7-8 L (7.4-8.5 qt).
- Assess the fluid: a dark color is acceptable, but a burnt smell and metallic particles on the plug magnet indicate increased wear. In that case, the transmission needs to be diagnosed first.
- Clean the metal shavings off the plug magnet, fit a new washer and tighten the plug. The torque is about 30-40 N·m (22-30 lb-ft); use the exact value from the manufacturer's specification.
- Remove the check (level) plug and the fill plug. Their locations depend on the version, so identify them by the transmission housing and the pan. Fill with new fluid through the fill hole using a syringe or tube until it starts to flow out of the check hole.
- Connect the scan tool or thermometer. Start the engine and let it idle. With the brake pedal pressed, hold the selector in each position (P, R, N, D) for a few seconds, then return to P.
- Check the level when the transmission fluid temperature is about 40-50 °C (104-122 °F) (exact window per the specification), with the engine running, the selector in P and the vehicle perfectly level. If the fluid runs out of the check hole in a thin stream or sits at the edge of the hole, the level is correct. If it does not flow, add more. If it flows heavily, let it drain until it slows to a thin stream or drips.
- Tighten the check plug and the fill plug with new washers. Use about 30-40 N·m (22-30 lb-ft) as a guide and confirm with the specification. Wipe down the transmission and check for leaks.
- If you removed the pan rather than only draining through the plug, tighten the pan bolts evenly in a crisscross pattern with low torque (about 8-12 N·m (6-9 lb-ft) as a guide, per the specification). After replacing the gasket, check for leaks for longer.
- Install the shield and take a 10-15 minute test drive with smooth shifting through the modes. Then check the level once more at operating temperature and inspect the pan for leaks.
Common mistakes and warnings
- Do not fill with fluid that has a different approval: the A8LF2 requires the specific Hyundai/Kia 8-speed automatic transmission specification
- Overfilling and underfilling are equally harmful: foamy fluid and overheating can cause jerking and accelerated clutch pack wear
- Always monitor the fluid temperature when checking the level
- If you have no experience checking the level through the check hole, leave the job to a repair shop
- Do not attempt this job yourself without a lift or pit and a thermometer
How it works · 3D
How an Automatic Transmission Works
How the part you're working on actually works — in plain English, on a 3D model.
Open in 3D →
Spotted a mistake? Tell us →
Our articles
Brand stories
The History of Hyundai
Hyundai Motor Company, whose name means "modernity" in Korean, is South Korea's largest automaker and one of the top…
Read →
Garage
Fuel Quality Indicators: What Octane and Cetane Numbers Mean
What is an octane number? What about a cetane number? Which fuel should you choose for a high-compression engine?…
Read →
Before you buy
How to Pick Up Your Car from the Dealership the Right Way
If you've decided to buy a car from a dealership, it isn't enough to simply choose a model you like, pay for it, and…
Read →