Autopapyrus · Land Rover Discovery Sport (2021)
https://autopapyrus.com/catalog/land-rover/discovery-sport/guides/connecting-a-diagnostic-scanner-to-the-obd-ii-port/
https://autopapyrus.com/catalog/land-rover/discovery-sport/guides/connecting-a-diagnostic-scanner-to-the-obd-ii-port/
Compiled automatically from service literature and owner experience. Specs are for the typical configuration — check them against your exact car before you start.
Land Rover Discovery Sport (2021): Connecting to the OBD Diagnostic Port
The Discovery Sport L550 diagnostic port is a standard 16-pin OBD-II connector. It is located in the driver's footwell, under the instrument panel, above the pedals and the left footrest (dead pedal). No disassembly is needed.
Part
| № | Part |
|---|---|
| 01 | 16-pin OBD-II diagnostic connector for Discovery Sport L550if the port is damagedFind on Amazon → |
Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.
Tools
2Read the codes yourself
A scanner plugged into the OBD2 port under the dashboard shows which fault codes the car has stored, before you buy any parts. Cars sold in the US from 1996, and petrol cars in Europe from 2001 (diesels from 2004), have this port.
- Basic code reader, about $20–40: reads and clears engine codes Amazon →
- Bluetooth scanner with a phone app, about $30–100: live sensor data, and on many cars ABS and airbag codes too Amazon →
Check that the scanner lists your make and model year before you buy. We may earn a commission from qualifying purchases.
There's a full repair manual for this car
Every system, wiring diagrams and torque specs — not just this job. Haynes AutoFix (online).
See manuals →
Step by step
9 steps- Set the parking brake, open the driver's door and sit in the driver's seat.
- Turn off the engine and keep the key or smart key inside the vehicle.
- Look down under the steering column, into the area above the pedals and above the left footrest. Use a flashlight: the port is located deep under the dash.
- Find the 16-pin trapezoidal connector. It is exposed and can be reached by hand without removing any trim.
- Plug the scanner cable or adapter in all the way. The connector fits only one way, so no force is needed. If the adapter will not go in, check its orientation and do not force it.
- Turn the ignition on (press the Start button without pressing the brake), or start the engine if the scanner or procedure requires it. Wait until the instrument cluster lights up.
- Turn on the scanner, or pair the adapter with your phone or tablet via Bluetooth or Wi-Fi.
- In the app, select Land Rover, model Discovery Sport, year 2021. Start reading fault codes from all modules.
- When you are done, turn off the ignition, disconnect the adapter and tuck the cable away so it does not interfere with the pedals.
Common mistakes and warnings
- Do not leave a cheap ELM327 adapter plugged in permanently: it keeps the bus under load and can drain the battery
- Do not clear codes or change module settings without understanding the consequences
- Module coding and software updates require a professional dealer-level scan tool with access to the manufacturer's network
- Plug in and remove the adapter only with the ignition off
- On 2021 vehicles, access to some modules may be restricted, and a basic scanner may not be able to read all systems
Spotted a mistake? Tell us →
Our articles
Brand stories
The History of the Land Rover Brand
Land Rover debuted on the automotive market in the late 1940s and focused on four-wheel-drive vehicles from the start.…
Read →
Garage
Fuel Quality Indicators: What Octane and Cetane Numbers Mean
What is an octane number? What about a cetane number? Which fuel should you choose for a high-compression engine?…
Read →
Before you buy
How to Pick Up Your Car from the Dealership the Right Way
If you've decided to buy a car from a dealership, it isn't enough to simply choose a model you like, pay for it, and…
Read →