← Hyundai

Hyundai Trajet: engine won't rev past 7.4% throttle pedal

Hyundai Trajet · 2001 9 answers Translated from Russian · original

The car is a Hyundai Trajet, 2.0D CRDI D4EA, 2001, after an accident and an engine overhaul. It runs normally at idle. When the accelerator pedal is pressed, the revs don't rise until 7.4%. At 7.5% and above the engine stalls. The stored fault codes are P0703 torque converter sw and P0340 camshaft position sensor. The timing marks are in place, there is a camshaft signal, and the fuel pressure at idle reads 265 bar.

Answers
O
Owner Nov 11, 2020

P0340 camshaft position sensor, check the camshaft sensor. P0703 Torque Converter/Brake Switch B Circuit Malfunction

O
Owner Dec 13, 2020

The sensor is good.

O
Owner Jan 02, 2021

Record an oscilloscope trace from the crankshaft position sensor and the camshaft position sensor and post it, then it will be clear. If the camshaft sensor gives a signal at the wrong time, the timing marks may be set wrong.

O
Owner Apr 26, 2021

The marks are in place, and I will post the oscilloscope trace. It seems to me the engine is running in limp mode: as soon as you touch the accelerator pedal, it stalls.

O
Owner May 08, 2021

Do the errors keep coming back every time it stalls, or also when starting? It surely doesn't complain about them for no reason.

O
Owner Aug 15, 2021

P0340 comes on after it stalls (when the accelerator pedal is pressed). According to Autodata, this engine should have a pressure of 1350 bar, but the scanner shows 265 bar. Maybe that's the catch.

O
Owner Feb 05, 2022

265 bar is the cranking pressure. At idle it should be higher, 700-800. As the revs increase, the pressure should jump to 1300-1400 bar. Check the injector return flow, the rail pressure regulator and the rail pressure sensor.

O
Owner Mar 20, 2022

Not at all! On the Hyundai D4EA diesel engine, the rail pressure at idle should be 220-300 bar. 1350 bar is the maximum pressure. First sort out the camshaft error. Post the oscilloscope trace.

O
Owner May 16, 2022

The marks are in place, but a tooth looks broken.

This discussion took place in the Russian-language Autopapyrus community and was translated automatically; owners' names are left out. Asking and answering on autopapyrus.com opens soon. Need step-by-step instructions now? Build a guide for your car →