← Hyundai

Hyundai Grand Starex, 2011: excess fuel consumption and the vehicle won't drive

Hyundai Grandstarex · 2011 8 answers Translated from Russian · original

A customer brought in a Hyundai Grand Starex (VIN KMJWA37JBBU367873) and asked for help sorting it out. The engine had been overhauled, but instead of the stock turbocharger 28200-4A480, a 733952-5001S turbocharger from a Kia Sorento (JC) 2.5 CRDI (D4CB) 140 hp (2002-2006) was installed. The customer insisted on the turbo swap himself, to save fuel (he read about it on a website). Naturally, there is now excess fuel consumption and the vehicle won't drive. I understand the engine control program now needs to be adapted to the new turbocharger.

Answers
O
Owner Mar 12, 2021

After this botched job, you'll probably have to flash the Sorento software or put the original turbo back.

O
Owner Mar 22, 2021

How do you pick the software from a Sorento?

O
Owner Apr 02, 2021

No idea, it's trial and error. I should have a full dump from a Sorento automatic somewhere. If I don't forget, I'll take a look. It would have to be written in boot mode, and you either leave the EEPROM as the original or re-pair the keys. But that's all in theory. How it will go in practice, no one knows.

O
Owner Apr 12, 2021

I think the 140 hp Sorento uses an EDC15. P.S. A great example of why you shouldn't try to save a customer's money, whether it's for a sale or anything else. The last one to touch it ends up being the one blamed.

O
Owner Apr 20, 2021

It won't work, the controller is different too.

O
Owner May 20, 2021

The turbos are fundamentally different. On the original, output is changed by varying the geometry, but the one fitted is controlled by a wastegate flap. The original spools up instantly and gives a flatter torque plateau, while the one that was fitted spools up more slowly and has different output. The owner is a genius... Anything can be done, but you'll most likely have to change the control scheme itself along with the valve, and then compare the fuel and air maps in the software... Such creative work will cost far more than a standard calibration. You'd also have to find someone who will do it correctly and is willing to spend a lot of time on it, because it's not certain everything will come out right the first time. To the author: offer him two options. First: put the original turbo back. Second: 20-30 thousand for a reprogram. I think he'll back out.

O
Owner Sep 25, 2021

Reading this, I think it would be cheaper to send the old turbo for repair and sell the new one.

O
Owner Oct 18, 2021

A new cartridge costs about ten thousand (a factory-made Chinese one that actually works). And if the housing on the old turbo isn't worn out, replacing the cartridge isn't a problem at all. The only thing is to clean the geometry properly, remove the oil pan to check the oil pickup for clogging, and check the geometry valve. P.S. I own the same Starex myself, and the turbo wore out at 200 thousand km. There's nothing tricky about replacing it. The key is to find the reason the old one died, otherwise the new one may also fail after 300 km.

This discussion took place in the Russian-language Autopapyrus community and was translated automatically; owners' names are left out. Asking and answering on autopapyrus.com opens soon. Need step-by-step instructions now? Build a guide for your car →