Autopapyrus · Toyota Camry 2.5 A25A-FKS (2018)
https://autopapyrus.com/catalog/toyota/camry/guides/cabin-air-filter-replacement/
https://autopapyrus.com/catalog/toyota/camry/guides/cabin-air-filter-replacement/
Compiled automatically from service literature and owner experience. Specs are for the typical configuration — check them against your exact car before you start.
Toyota Camry 2.5 A25A-FKS (2018): Cabin Air Filter Replacement
On the Camry XV70 (2.5 A25A-FKS), the cabin air filter is located behind the glove box. Replace it every 15,000-20,000 km (about 10,000-12,000 miles) or once a year. The procedure takes 10-15 minutes and requires no tools.
Part
| № | Part | Genuine part no. | Alternatives |
|---|---|---|---|
| 01 | ToyotaFind on Amazon → | 87139-58010 | AlternativesMann FilterFiltron |
Amazon links search by the part name and genuine number; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.
Part numbers are from the manufacturer's original catalogue. Check them against your VIN before ordering.
There's a full repair manual for this car
Every system, wiring diagrams and torque specs — not just this job. Haynes and 5 more.
See manuals →
Step by step
10 steps- Open the glove box and take out all of its contents.
- Look on the left and right sides under the glove box. You will find two plastic clips (they may be folded in or simply snapped into place).
- Press in or unscrew both clips. The glove box should swing down or come off completely.
- Behind the glove box you will see a black plastic box (the filter housing) with white or black side clips.
- Press the two side clips and pull the filter cover toward you. It will open upward.
- Pull out the old filter (rectangular, pleated). Wipe the housing with a dry rag or vacuum it.
- Make sure there is no debris, leaves or insects in the housing.
- Install the new filter with the pleats facing UP (this is important for proper airflow) and push it into the housing until it clicks.
- Close the filter cover until both clips click into place.
- Reinstall the glove box and snap it into place.
Common mistakes and warnings
- If a lot of dust or leaves fall out when you open the filter housing, blow out the housing with compressed air before installing the new filter
- A dirty housing will reduce the benefit of a fresh filter
- Selection guidance: The OE number 87139-02090 is the most reliable choice
- The Mann and Filtron equivalents are compatible and cheaper
- Avoid no-name filters, as they often seal poorly
Spotted a mistake? Tell us →
Our articles
Test drives
Toyota Camry: One Car for Every Market. We Test the New Sedan
The new-generation Toyota Camry is built with the latest technology. It gets a new platform, a larger display and an…
Read →
Brand stories
The History of Toyota
From weaving looms to reliable mass-produced cars.
Read →
Garage
Fuel Quality Indicators: What Octane and Cetane Numbers Mean
What is an octane number? What about a cetane number? Which fuel should you choose for a high-compression engine?…
Read →