Mitsubishi Lancer 9 1.6, camshaft sensor fault
A customer came in complaining of poor starting lately (especially in hot weather). Diagnostics showed a camshaft sensor error. He bought a new sensor and fitted it, and the car won't start. He puts his old (original) one back and the car starts without any problems. Three sensors were tried with the same result. The last time, he fitted one from another identical working car, and it still wouldn't start (it catches and stalls). What's wrong?
What about oscillograms with the original sensor and with all the others?
The scope trace from the original sensor was normal at the time. I haven't looked at the new ones, since the customer experimented himself. What do you mean by "the others"?
Do you believe the customer? Check the crankshaft and camshaft sensor signals with an oscilloscope. Maybe everything will fall into place.
Check the timing. The chain is probably stretched.
It's a belt, not a chain. Take the scope traces and we'll compare them. I'll take mine from my own car.
For a start, at least check the timing marks on the timing belt. It's not difficult.
There are different types of sensors, and they can get mixed up. I think there was a link somewhere about counterfeit ones.
Can you give more detail?
Are you listening to your colleagues or not? Take a scope trace with the original sensor and with the new one. I hope the new sensor was chosen correctly, and did you check the camshaft position sensor circuit? P.S. If you have nothing to take a scope trace with, then check the marks by hand. It takes 15 minutes.