https://autopapyrus.com/catalog/tesla/cybertruck/guides/checking-traction-battery-condition-before-purchase/
Tesla Cybertruck (2024): Checking Traction Battery Condition Before Purchase
At the time of inspection, the traction battery in a 2024 Cybertruck has about two years of use. Its condition is assessed with the built-in Battery Health test, the range at a 100% charge, the charging and fault history, an external inspection, and the factory warranty still in effect. 2024 vehicles are first-generation, and under Tesla's warranty terms the battery and drive unit are still covered.
Key figures
- Battery and drive unit warranty8 years or 150,000 miles (240,000 km), with a 70% minimum capacity. Check the remaining term from the first delivery date (steps 2-3)
- Basic vehicle warranty4 years or 50,000 miles (80,000 km). It's important to know whether it still covers the other components (step 3)
- Full Battery Health testabout 24 hours. This is the time to set aside for an accurate battery check with a charger connection (step 11)
- Average EV battery wearabout 1.8% per year. A benchmark for judging the test result (step 18)
Check these values against the manufacturer’s specification for your vehicle before you start.
Part
| № | Part |
|---|---|
| 01 | Not required. This is a pre-purchase inspectionFind on Amazon → |
Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.
Tools
4Read the codes yourself
A scanner plugged into the OBD2 port under the dashboard shows which fault codes the car has stored, before you buy any parts. Cars sold in the US from 1996, and petrol cars in Europe from 2001 (diesels from 2004), have this port.
- Basic code reader, about $20–40: reads and clears engine codes Amazon →
- Bluetooth scanner with a phone app, about $30–100: live sensor data, and on many cars ABS and airbag codes too Amazon →
Check that the scanner lists your make and model year before you buy. We may earn a commission from qualifying purchases.
Step by step
20 steps · 5 stagesStage 1 of 5 Documents and warranty 5 steps
- Ask the seller for the purchase agreement and the title or registration documents. Check the VIN on the windshield, in the Tesla app, and in the documents. The data must match.
- Find out the date of the vehicle's first delivery. The warranty starts on the first day of delivery to the first owner, not on the date of your purchase.
- Check the warranty terms in Tesla's official document (North America, revision dated 2025/06/05). Battery and Drive Unit: 8 years or 150,000 miles (240,000 km), whichever comes first, with a guarantee of at least 70% battery capacity. Basic warranty: 4 years or 50,000 miles (80,000 km). The warranty transfers to the next owner at no cost.
- Know the conditions under which the warranty does not apply. The main ones are: off-road driving and overloading the vehicle, use as a permanent stationary power source, opening the battery or drive unit yourself, and charging by methods other than those described in the owner's manual. The warranty also does not cover normal gradual capacity loss while it stays above the threshold. Ask the seller whether any of these cases occurred.
- Keep in mind that warranty service is tied to the region of the vehicle's first sale. For the US and Canada, service is allowed in both countries. For other countries, find out where the vehicle can be serviced under warranty before you pay.
Stage 2 of 5 Inspection and preparation 4 steps
- Inspect the vehicle in good light. Look for signs of impacts to the underbody, dents and scratches in the battery area, signs of underbody repair, and corrosion on the fasteners of the underbody shield.
- Inspect the charge port and its cover for melting, soot, cracks, and signs of moisture. Check that the port cover opens and closes normally.
- Ask the seller about warnings on the screen, high-voltage repairs, whether the vehicle has been in water or in an accident, and whether it has taken part in the Powershare program. Ask to see the service records.
- Make sure the vehicle is charged to at least 20-30%, or better, that the seller agrees to a full charge. Prepare a cable or arrange fast home charging for the duration of the test.
Stage 3 of 5 Checking via the screen 4 steps
- Turn on the vehicle and open Controls, then Service, then Battery Health. The screen will show the test requirements, the date and result of the last test, and an approximate battery condition.
- If the result is old or missing, run the Battery Health Test. This is a more thorough test. It takes about 24 hours and requires a connection to a sufficiently powerful home charger. During the test the battery is discharged and charged, and the actual capacity is calculated at the end. For a purchase, it is best to arrange this test with the seller. The result is more accurate than the instant reading on the screen.
- Charge the battery to 100% and write down the range shown on the screen. Compare it with the rated value for your trim. A noticeable drop points to wear. Keep in mind that range depends on temperature, tires, and the previous owner's driving style.
- Open the charging history in the Tesla app or on the onboard computer, if the seller gives you access. Look for the share of fast charges, frequent charges to 100%, and discharges to zero. All of these speed up wear.
Stage 4 of 5 Additional diagnostics and test drive 4 steps
- Optionally, connect an OBD-II ELM327 adapter with an app to read the SoH (state of health). This is quick and inexpensive, but the readings depend on temperature and on whether the battery was recently charged to 100%. Compare the result with the Battery Health test data.
- Take a test drive of at least 30-40 minutes: hard acceleration, steady-speed driving, and regenerative braking. Watch for smooth power delivery, no battery or charging warnings, and the behavior of the charge indicator. Sudden jumps in the charge percentage or a sudden power limitation point to problems.
- After the drive, check the difference in remaining charge between the screen and the range estimate. A large discrepancy from your actual drive is a reason for further checking.
- If the results raise doubts, order a diagnostic at a Tesla service center or a specialized repair shop. Make the purchase only after the result is confirmed.
Stage 5 of 5 Final decision 3 steps
- Compare the data you collected. As a benchmark for wear, electric vehicles lose about 1.8% per year on average (Geotab 2024 study). For a two-year-old vehicle, a noticeably larger loss is a reason to negotiate the price or walk away.
- Record the test results, screenshots, and date in the bill of sale. This will help with disputes and warranty claims.
- After the purchase, check in the Tesla app that the vehicle is linked to your account, and update the software. Your proof of the battery's condition will be the saved test result.
Common mistakes and warnings
- The Cybertruck's high-voltage battery can be lethal
- Do not open the underbody shield, disconnect the orange high-voltage cables, or puncture or damage the battery case
- Tampering with the battery yourself voids the warranty
- Have any high-voltage work done only at a repair shop unless you have the experience and qualifications (1000 V gloves and high-voltage circuit shutdown)
Spotted a mistake? Tell us →
Our articles
Brand stories
The History of the Tesla Brand
Tesla Motors, a North American company founded in 2003, is rightly considered the pioneer of a new era in the…
Read →
Garage
Fuel Quality Indicators: What Octane and Cetane Numbers Mean
What is an octane number? What about a cetane number? Which fuel should you choose for a high-compression engine?…
Read →
Before you buy
How to Pick Up Your Car from the Dealership the Right Way
If you've decided to buy a car from a dealership, it isn't enough to simply choose a model you like, pay for it, and…
Read →