Autopapyrus · Honda Vezel (1st generation)
https://autopapyrus.com/guides/honda/vezel/cabin-air-filter-replacement-gen-1-2019/
https://autopapyrus.com/guides/honda/vezel/cabin-air-filter-replacement-gen-1-2019/
Compiled automatically from service literature and owner experience. Specs are for the typical configuration — check them against your exact car before you start.
Honda Vezel (1st generation): Cabin Air Filter Replacement
The cabin air filter on the Honda Vezel (HR-V in some markets) should be replaced every 12,000-15,000 km (7,500-9,300 miles) or once a year. It is located behind the glove box, and the job requires no tools.
Part
- 🔩 Honda 80291-T5A-J01 (carbon type, fits 1st-generation Vezel). Aftermarket equivalents: Double Force DFC21003, as well as 80291-TF0-941, 80292-TF0-G01
Step by step
8 steps- Open the glove box and empty it.
- Squeeze the two side latches on the edges of the glove box and swing it fully downward.
- Push the glove box damper down. This lets you lower the box below its normal position to reach the filter housing.
- Behind the glove box, find the rectangular plastic cover. Unclip the two side clips and remove it.
- Pull out the old filter, noting the direction of the airflow arrows.
- Wipe out the housing with a dry cloth, or vacuum it if it is heavily soiled.
- Install the new filter with the arrows pointing the correct way. They must match the marking on the housing.
- Snap the cover back into place and return the glove box to its original position.
Common mistakes and warnings
- Be careful but firm when handling the damper, since sudden movements can damage its mount. In dusty areas, replace the filter more often than the recommended interval.