https://autopapyrus.com/catalog/tesla/model-3/guides/checking-traction-battery-health-when-buying/
Tesla Model 3 (2021): Checking Traction Battery Health When Buying
You can check the real capacity of the traction battery without disassembly, using the built-in Battery Health test. The test discharges the battery almost to zero and then charges it again, so its result is more accurate than an estimate based on range. No high-voltage components are opened. Everything is done through the car's screen and the app.
Key figures
- Minimum guaranteed battery capacity70% of original. If it falls below this within the warranty period, Tesla replaces the battery (steps 2 and 16)
- Battery warranty8 years or 160,000 km (rear-wheel drive) / 192,000 km (other versions). Check the car's date and mileage (step 1)
- Charge before the test20% or less, otherwise the test will not start (step 8)
- Charging power for the testat least 5 kW, AC station (not a Supercharger). You need home charging or a mobile connector (step 8)
- Test frequencyonce every 6 months without Service Mode. Ask the seller when the test was last run (step 9)
- Test durationup to 18 hours (up to 24 hours from Service Mode). Plan the inspection in advance (step 10)
Check these values against the manufacturer’s specification for your vehicle before you start.
Part
| № | Part |
|---|---|
| 01 | Not required (diagnostics)Find on Amazon → |
Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.
Tools
2Read the codes yourself
A scanner plugged into the OBD2 port under the dashboard shows which fault codes the car has stored, before you buy any parts. Cars sold in the US from 1996, and petrol cars in Europe from 2001 (diesels from 2004), have this port.
- Basic code reader, about $20–40: reads and clears engine codes Amazon →
- Bluetooth scanner with a phone app, about $30–100: live sensor data, and on many cars ABS and airbag codes too Amazon →
Check that the scanner lists your make and model year before you buy. We may earn a commission from qualifying purchases.
Step by step
18 steps · 5 stagesStage 1 of 5 Documents and initial assessment 4 steps
- Confirm the car's version: rear-wheel drive (RWD) or another. The battery warranty depends on it. For RWD it is 8 years or 160,000 km, and for other Model 3 versions it is 8 years or 192,000 km, whichever comes first.
- Find out the date of first registration and the mileage. Tesla's warranty guarantees at least 70% of the original capacity. If capacity drops to 70% or below within the warranty period, the battery is replaced under warranty.
- Ask the seller for the charging history: how often the car was charged at Supercharger stations, to what level, and whether there were any battery errors.
- Inspect the car. The screen should show no active warnings related to the battery, the battery cooling system, or the high-voltage system. Check the underbody and the battery shield for impacts, dents, and signs of leaks.
Stage 2 of 5 Quick assessment without the test 3 steps
- Charge the car to 100% and note the displayed range. Compare it with the original value for this version. This is a rough but informative check.
- Alternative without a full charge: on the "Energy" screen, multiply the average consumption by the projected range. This gives the amount of energy in the battery right now. Divide it by the state of charge as a fraction (80% = 0.8) to get the capacity of the full battery. Compare it with the rated capacity of your version.
- Capacity loss benchmarks: typical loss is 10-20%. The fastest drop (1-3%, sometimes up to 5%) occurs in the first few months or the first 1.5 years, after which the decline slows. For a 2021 car, a result noticeably worse than 80-85% is a reason to negotiate or walk away.
Stage 3 of 5 Built-in battery health test 6 steps
- Prepare the conditions: the car in P (Park), charge at 20% or lower, the car connected to the network, no software update scheduled, and no active warnings related to the battery or cooling system. Connect the car to AC charging (a Wall Connector or mobile connector) rated at 5 kW or more (about 20 A at 240 V). The test cannot be run at a Supercharger station.
- Start the test: on the screen, go to Controls → Service → Battery Health, or in the Tesla app, go to Service → Battery Health. Without Service Mode, the test is available once every 6 months, so ask the seller when it was last run.
- Plan for the time: the test takes up to 18 hours (up to 24 hours when started from Service Mode), depending on battery size, charging power, and starting charge. During discharge, the fan may be very loud, which is normal. You can stop the test at any time. You will receive a notification in the app when it finishes.
- If the test has never been run in the Battery Health section, it may show 100%. This is not the real capacity, so do not take this value as the result.
- Option to start from Service Mode (without the once-per-6-months limit): on the screen, press and hold the car model icon until a password prompt appears, then enter the word service. Then go to Battery → High Voltage → Health Test. In this mode, the charge must be below 50% and the car must be connected to Level 2 charging. Work only on a stationary car and do not change anything in other sections.
- The test shows the result as a percentage of the original capacity. After the test, the car is left charged to about 100%, so drive it or run the climate control soon afterward. If the car has an LFP battery (this applies to some rear-wheel-drive versions), this is not necessary. The displayed range may change after the test because the battery management system recalibrates.
Stage 4 of 5 Additional diagnostics 2 steps
- For a deeper check, connect an OBD adapter to the diagnostic port and open the Scan My Tesla app. Compare the capacity, the voltage spread between cell groups, and the internal resistance. The TeslaFi and Tessie apps also show how range loss has progressed over charging sessions, if they were installed by the current owner.
- Check charging in practice: connect the car to an AC station and to a fast-charging station. The car should accept charging without errors and without abnormally low power. Any charging or battery cooling errors are a reason to have the car checked at a Tesla service center.
Stage 5 of 5 Conclusions 3 steps
- Compare the test result with these benchmarks: about 85% or higher for a 2021 car is normal, 70-80% is a reason for serious negotiation, and about 70% or below is a warranty case, but you need to confirm it at a Tesla service center.
- If the seller does not let you run the test or does not allow the car to be connected for several hours, treat this as a red flag.
- Before the deal, make sure the car is not under a lien, was not imported without proper documents, and that the battery warranty remains valid under your registration. Check the warranty terms for a change of owner with a Tesla service center.
Common mistakes and warnings
- Never open the battery or the high-voltage connectors: this is life-threatening
- High-voltage work is performed only at a service center with the high-voltage system disconnected, using Class 1000 V gloves
- Use only the built-in test, apps, and data readout
- Connect OBD adapters carefully and only to the diagnostic port, without changing any settings
- If the screen shows battery warnings or the system will not let you start the test, contact a Tesla service center
Spotted a mistake? Tell us →
Our articles
Test drives
Tesla Model 3 Review
Electric cars from the American company Tesla are gaining popularity around the world and sell by the thousands. Not…
Read →
Brand stories
The History of the Tesla Brand
Tesla Motors, a North American company founded in 2003, is rightly considered the pioneer of a new era in the…
Read →
Garage
Fuel Quality Indicators: What Octane and Cetane Numbers Mean
What is an octane number? What about a cetane number? Which fuel should you choose for a high-compression engine?…
Read →