https://autopapyrus.com/catalog/tesla/model-3/guides/tire-pressure-monitoring-sensor-tpms-replacement/
Tesla Model 3 (2021): Tire Pressure Monitoring Sensor (TPMS) Replacement
On the Model 3, the tire pressure sensor sits inside the tire on the wheel and is secured to the wheel with a nut. To replace it, the tire has to come off the wheel, and then the wheel has to be balanced. This guide covers replacing one sensor. The job is done at a tire shop and can't be done at home.
Key figures
- Sensor nut tightening torqueset this on the torque wrench in step 11; overtightening will damage the seal or the wheel8 N·m (5.9 lb-ft)
- Socket size for the sensor nutused to remove the old sensor (step 6) and to take the nut off the new one (step 8)11 mm (deep)
- Speed and time for sensor pairingthis is how long you need to drive after replacement for the vehicle to see the sensors (step 19)from 15 mph (24 km/h), 1-3 minutes
Check these values against the manufacturer’s specification for your vehicle before you start.
Diagram: where the TPMS sensor nut and valve are
- 1Sensor body: sits inside the tire. Insert the new sensor so it sits tight against the wheel.
- 2Seal at the base: must sit fully on the sensor base, otherwise it can be damaged.
- 3Valve: metal stem. Air comes out through it when the valve core is removed.
- 4Nut: undo it with an 11 mm socket to remove the old sensor. Tighten the new one to 8 Nm.
- 5Threaded end of the valve: passes through the wheel mounting hole. Remove the cap from the new sensor valve.
Part
| № | Part | Alternatives |
|---|---|---|
| 01 | Bluetooth (BLE) tire pressure monitoring sensor (TPMS) for Tesla Model 3, with threaded wheel mounting nutsensor nut is reusedFind on Amazon → | AlternativesAutelSchrader (only if the sensor is compatible with Tesla's BLE system) |
Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.
Tools
8Read the codes yourself
A scanner plugged into the OBD2 port under the dashboard shows which fault codes the car has stored, before you buy any parts. Cars sold in the US from 1996, and petrol cars in Europe from 2001 (diesels from 2004), have this port.
- Basic code reader, about $20–40: reads and clears engine codes Amazon →
- Bluetooth scanner with a phone app, about $30–100: live sensor data, and on many cars ABS and airbag codes too Amazon →
Check that the scanner lists your make and model year before you buy. We may earn a commission from qualifying purchases.
Step by step
20 steps · 5 stagesStage 1 of 5 Preparation 3 steps
- Identify the wheel with the faulty sensor from the message on the screen and the pressure readings. If a sensor was replaced on another wheel, all 4 sensors should show on the screen.
- Park the vehicle on a level surface or lift and engage the parking brake. Loosen the lug nuts half a turn while the wheel is still on the ground.
- Raise the vehicle at the factory jack points and remove the wheel. When reinstalling, use the lug nut torque specified in the Tesla service manual for the Model 3.
Stage 2 of 5 Removing the tire and sensor 3 steps
- Put on safety glasses and gloves. Use the valve core removal tool to unscrew the valve core from the valve stem and let the tire deflate completely. The air escapes quickly.
- Break the tire off the wheel on the tire changing machine.
- Use an 11 mm socket to remove the nut that holds the sensor to the wheel, then take the sensor out of the wheel.
Stage 3 of 5 Installing the new sensor 5 steps
- Remove the cap from the new sensor's valve stem.
- Remove the nut from the new sensor's valve stem (11 mm socket).
- Thoroughly wipe the wheel's mounting hole, inside and out, with an alcohol wipe.
- Insert the sensor into the wheel so that it sits snugly against the wheel. Check that the seal is fully seated on the base of the sensor. Otherwise, it can be damaged during installation.
- Tighten the sensor nut to 8 N·m (5.9 lb-ft). Using a torque wrench is mandatory: do not overtighten.
Stage 4 of 5 Assembling the wheel 5 steps
- Mount the tire onto the wheel. Then press the upper bead down with the roller and let it seat on the wheel.
- Inflate the tire so the bead seats in place.
- Install the valve core and remove the wheel from the machine.
- Inflate the tire to the pressure shown on the placard in the driver's door jamb (exact value per Tesla specifications).
- Balance the wheel.
Stage 5 of 5 Installation and check 4 steps
- Install the wheel on the vehicle and tighten the lug nuts in a crisscross pattern, then do the final tightening on the ground to the torque specified by Tesla.
- If sensors were replaced on all wheels, repeat steps 3-17 for each wheel.
- After replacement, the vehicle needs to "see" the new sensor. To do this, drive at a speed of at least 15 mph (24 km/h) for 1-3 minutes. The sensors will connect on their own, and manual ID registration is not required in the current Tesla procedure. On some firmware versions, and when sensors are installed on all wheels, Tesla service additionally updates the vehicle configuration.
- On the touchscreen, check that all 4 sensors show pressure. If a sensor doesn't appear, check the fit of the sensor and its seal, then repeat the drive.
Common mistakes and warnings
- The tire deflates quickly when the valve core is removed, so work with safety glasses and gloves on
- Do not tighten the sensor nut beyond 8 N·m (5.9 lb-ft): you can damage the wheel or the seal
- If you have no experience with tire changing equipment, leave the job to a tire shop
- An incorrectly assembled wheel is dangerous at speed
Spotted a mistake? Tell us →
Our articles
Test drives
Tesla Model 3 Review
Electric cars from the American company Tesla are gaining popularity around the world and sell by the thousands. Not…
Read →
Brand stories
The History of the Tesla Brand
Tesla Motors, a North American company founded in 2003, is rightly considered the pioneer of a new era in the…
Read →
Garage
Fuel Quality Indicators: What Octane and Cetane Numbers Mean
What is an octane number? What about a cetane number? Which fuel should you choose for a high-compression engine?…
Read →