← Model S

Tesla Model S (2018): Tire Pressure Sensor (TPMS) Replacement

The sensor is mounted on the inside of the wheel and can only be removed after the tire is fully dismounted. That is why this job is done on a tire changer. This guide covers one wheel. The procedure is the same for the other wheels. After installation, the sensor must be paired with the car.

DifficultyMedium Time1–1.5 hours per wheel Steps26

Key figures

  • Baolong sensor nut torquetorque wrench with 11 mm deep socket, step 16; any more can snap the valve stem
    5 N·m (3.7 lb-ft)
  • Continental sensor nut torquesame wrench, step 16; do not overtighten, or the housing will crack or the valve stem will shear off
    8 N·m (5.9 lb-ft)
  • Socket size for the sensor nutdeep socket with a ratchet or torque wrench, steps 13 and 16
    11 mm
  • Speed to complete pairingafter the wheel is installed, step 25
    above 32 km/h for about a minute

Check these values against the manufacturer’s specification for your vehicle before you start.

Parts

3
№Part
01 TPMS tire pressure sensor, Tesla Model, Baolong or Continental, with seal and mounting nutsame manufacturer as fitted to the car; one per wheelFind on Amazon →
02 Self-adhesive wheel weights, newFind on Amazon →
03 Valve core and capif neededFind on Amazon →

Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.

Tools

9

Read the codes yourself

A scanner plugged into the OBD2 port under the dashboard shows which fault codes the car has stored, before you buy any parts. Cars sold in the US from 1996, and petrol cars in Europe from 2001 (diesels from 2004), have this port.

  • Basic code reader, about $20–40: reads and clears engine codes Amazon →
  • Bluetooth scanner with a phone app, about $30–100: live sensor data, and on many cars ABS and airbag codes too Amazon →

Check that the scanner lists your make and model year before you buy. We may earn a commission from qualifying purchases.

Step by step

26 steps · 5 stages
Stage 1 of 5 Preparation 4 steps
  1. Identify which sensor is faulty from the warning on the screen or the TPMS error. Find out which sensor type is fitted (Baolong or Continental), because the tightening torque and the pairing procedure depend on it.
  2. If the car has air suspension, turn on Jack mode (service lift mode) on the touchscreen before raising the car.
  3. Park the car on a level surface, chock the wheels, and raise the required corner with a jack at the designated lift points.
  4. Loosen the lug nuts and remove the wheel. Tighten the lug nuts on installation to the manufacturer's specified torque.
Stage 2 of 5 Dismounting the tire 8 steps
  1. Put on safety glasses and gloves: the tire deflates quickly.
  2. Remove the valve core with a valve core tool and release all the air.
  3. Place the wheel on the tire changer face up, install the center clamp, and fit and tighten the cone.
  4. Position the upper roller at the edge of the upper rim bead, and the lower roller at the edge of the lower rim bead.
  5. While rotating the wheel and lubricating the beads, break the upper and lower beads loose. The sensor sits close to the rim, so do not damage it with the roller.
  6. Bring the changer's working head to the edge of the rim and hook the upper bead with the tire lever. Keep the sensor ahead of the head so the head does not hit it.
  7. While rotating the wheel and lubricating the bead, work the upper bead over the rim.
  8. Lift the tire slightly, remove the lower bead the same way, and take the tire off the wheel. The head must not touch the sensor.
Stage 3 of 5 Replacing the sensor 4 steps
  1. Use an 11 mm deep socket to remove the nut that holds the sensor to the wheel, then take out the sensor.
  2. Wipe the mounting hole in the wheel, inside and out, with an alcohol wipe.
  3. Remove the valve cap from the new sensor. Make sure the seal sits tightly at the base of the sensor, or it will be damaged during installation.
  4. Press the sensor firmly against the inside of the wheel and tighten the mounting nut: 5 N·m (3.7 lb-ft) for a Baolong sensor, 8 N·m (5.9 lb-ft) for a Continental. An internal breakaway ring will release before full torque is reached, so keep tightening until you reach full torque. Do not tighten further: you can snap the valve stem or damage the housing.
Stage 4 of 5 Mounting the tire and balancing 6 steps
  1. Lubricate both beads of the tire.
  2. Check the mounting direction using the sidewall markings: a rotation arrow or a label such as "outside".
  3. Place the tire on the wheel, bring the changer's head into position, and mount the lower bead, then the upper bead. The head must not touch the sensor.
  4. Inflate the tire carefully until the beads seat, without exceeding the pressure marked on the sidewall. For the operating pressure, see the placard on the driver's side door pillar.
  5. Install the valve core and take the wheel off the changer.
  6. Balance the wheel on the wheel balancer using new weights, first cleaning and degreasing the spot where they will be applied.
Stage 5 of 5 Installation and sensor pairing 4 steps
  1. Mount the wheel on the car and tighten the lug nuts in a crisscross pattern. Lower the car and tighten them to the final torque specified by the manufacturer.
  2. Perform the sensor ID pairing (learning) procedure for your sensor type (Baolong or Continental). Pairing is done with diagnostic equipment or at a repair shop. The new sensor will not work without it.
  3. Drive for about a minute at a speed above 32 km/h until pairing completes.
  4. Make sure there are no TPMS warnings on the screen, and check the pressure in all tires against the placard.

Common mistakes and warnings

  • A deflating tire and bead rollers work under great force, so use safety glasses and gloves, and do not exceed the pressure marked on the sidewall
  • If you have no experience with a tire changer, leave the dismounting and sensor pairing to a tire shop or repair shop: a damaged sensor, a broken valve stem, or a poorly seated bead is dangerous at speed
Spotted a mistake? Tell us →

Our articles

More articles →