https://autopapyrus.com/catalog/tesla/model-s/guides/checking-traction-battery-health-when-buying/
Tesla Model S (2018): Checking Traction Battery Health When Buying
Model S traction battery health is judged by remaining capacity, meaning the range the car shows at a full charge compared with when it was new. The most reliable approach combines three methods: calculating range at a 100% charge, calculating capacity from the kilowatt-hours used on a drive, and reading data using service mode or a third-party app. This guide covers a battery from the 2018 model year. The variant (75D, 100D, P100D) determines the original range, so first identify it from the label and in the car's menu.
Key figures
- Full capacity in kilowatt-hoursstep 12: if the result is noticeably lower than the stated capacity for the variant, the battery is wornenergy used on the drive divided by the charge drop as a fraction
- Minimum charge drop for the calculationstep 11: on shorter drives the result is inaccurate25% (preferably about 50%)
- Charge level for comparing rangestep 7: if you can't charge to 100%, measure the range as it changes from 91% to 89%90-91%
- Capacity loss on a car with about 250,000 milesstep 9: a benchmark to compare your result againstabout 23%
- Battery warrantystep 21: for a 2018 car the term may already have ended8 years with unlimited mileage (for Model S before 2020 with a battery over 70 kWh)
Check these values against the manufacturer’s specification for your vehicle before you start.
Parts
2| № | Part |
|---|---|
| 01 | Traction battery (high-voltage pack) assemblyif faultyFind on Amazon → |
| 02 | Traction battery moduleif faultyFind on Amazon → |
Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.
Tools
3Step by step
22 steps · 6 stagesStage 1 of 6 Preparing for the inspection 5 steps
- Arrange with the seller that the car is not charged to 100% beforehand and that its settings are left alone. You need a warm car in normal weather: range is noticeably lower in the cold, and full range is usually available at temperatures above about 20 °C (68 °F).
- Find out the exact variant (75D, 100D, P100D, etc.) and look up the original range of a new car for it. Without this, the comparison is meaningless.
- Ask the seller to turn off Range Mode if it is on: it overstates the readings by a few miles or kilometers.
- On the car's screen, switch the charge display between percentage and rated range and back again: you will need both values.
- Photograph the battery data label, which is located near the right wheel arch. Also photograph the screen with the readings before you start the check.
Stage 2 of 6 Estimating capacity from range 4 steps
- Option A (most accurate): charge the battery to 100% and record the range. Compare it with the original value for your variant. Keep in mind that calibration of the battery management system can introduce an error, and the result may be slightly lower than the real figure.
- Option B (if a full charge is not possible): charge to 90-91%, drive smoothly, and record the range at the moment it changes from 91% to 90% and from 90% to 89%. Take the average and scale it to 100%. The result is approximate: 50% on the screen can mean 49.6% or 50.4%.
- Quick estimate: at 50%, the range should be about half of the value at 100% (for example, about 125-128 miles at 50% corresponds to about 250-257 miles on a full charge).
- Use real-world examples as a guide: a Model S 85 with about 80,000 km (50,000 miles) kept about 95% of its capacity. A car with about 250,000 miles lost about 23% of its capacity, and a car with more than 430,000 miles, where the first estimate gave about 23% loss, showed about 28% (72% remaining) in a more detailed check. For a 2018 car, a loss noticeably higher than these figures at low mileage should raise a red flag.
Stage 3 of 6 Calculating capacity from energy use 3 steps
- Display the charge as a percentage along with the energy counter (kilowatt-hours per trip). Write down the starting charge percentage.
- Drive a stretch on which the charge drops by at least 25% (preferably about 50%, which is roughly 80 km (50 miles) or more), without stopping to recharge. Short drives give an unreliable result.
- Record the final percentage and the kilowatt-hours used. Formula: divide the kWh used by the percentage difference expressed as a fraction. Example: 36 kWh with a drop from 80% to 30% gives 36 / 0.5 = 72 kWh of full capacity. Compare this with the stated capacity for your variant.
Stage 4 of 6 Battery data diagnostics 3 steps
- If the seller agrees, connect a diagnostic adapter with a third-party app (for example, Tessie) or use the car's service mode. These tools show the estimated degradation and battery condition in more detail than the screen does. Service mode requires special access codes, so if you lack experience, it is better to go to a repair shop.
- For the most accurate assessment, order an independent battery diagnostics report (from an EV specialist shop). This is an objective way to find out the remaining capacity and the condition of the modules.
- Check the voltage spread between the cell blocks and any battery errors, if the diagnostics show them. A large spread means problem modules.
Stage 5 of 6 Test drive and general inspection 5 steps
- During the drive, assess performance: noticeably weaker acceleration and power limiting at a high state of charge point to battery degradation or a fault.
- Check charging: connect the car to a regular AC station and to a DC fast-charging station. Charging should start without errors, the charging speed should not drop sharply, and the port and the supplied cable should not get hot or show signs of melting.
- Inspect the underside of the car: check the battery shield for impacts, dents and signs of corrosion, and check for coolant leaks from the battery cooling system.
- Check the screen and the Tesla app for battery warnings, power limitations and service messages.
- Ask the seller about the history: how often DC fast charging was used, how often the car was charged to 100%, and whether the battery was ever replaced or repaired.
Stage 6 of 6 Warranty and decision 2 steps
- Find out the warranty status for the battery and drive unit. For Model S vehicles before 2020 with a battery over 70 kWh, an 8-year warranty with unlimited mileage is stated. For a 2018 car it ends around 2026, so it may have already expired or be about to expire. Confirm the remaining-capacity terms and whether the warranty applies in your country with the seller and at a Tesla service center.
- Compare the results of all the methods. If they differ greatly, trust the diagnostic report. Use the results in price negotiations: the price should reflect the battery's remaining life.
Common mistakes and warnings
- The Model S traction battery is high voltage
- Do not open the battery shield or work on the orange high-voltage cables without training, high-voltage disconnection and Class 1000 V insulated gloves
- Have any battery repair done only at a specialist shop
- Calculations based on charge percentage are approximate and depend on temperature, Range Mode and calibration, so do not base a purchase decision on a single method
Spotted a mistake? Tell us →
Our articles
Brand stories
The History of the Tesla Brand
Tesla Motors, a North American company founded in 2003, is rightly considered the pioneer of a new era in the…
Read →
Garage
Fuel Quality Indicators: What Octane and Cetane Numbers Mean
What is an octane number? What about a cetane number? Which fuel should you choose for a high-compression engine?…
Read →
Before you buy
How to Pick Up Your Car from the Dealership the Right Way
If you've decided to buy a car from a dealership, it isn't enough to simply choose a model you like, pay for it, and…
Read →