← Model Y

Tesla Model Y (2022): Wiper Blade Replacement

It's recommended to replace the Model Y wiper blades at least once a year. The car moves the wipers to the service position through a menu on the screen. The blades come off and go on without tools. This guide covers replacing the front blades.

DifficultyEasy Time10-15 minutes Steps12

Key figures

  • Driver-side blade lengthcheck when buying (step 2)
    650 mm (26 in)
  • Passenger-side blade lengthit's shorter than the driver-side blade, so don't mix them up when buying (step 2)
    500 mm (20 in)

Check these values against the manufacturer’s specification for your vehicle before you start.

Parts

2
№PartAlternatives
01 Front wiper blade, driver side, 650 mm (26 in)1 pc.Find on Amazon → AlternativesBoschTesla (blades)
02 Front wiper blade, passenger side, 500 mm (20 in)1 pc.Find on Amazon → AlternativesBoschTesla (blades)

Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.

Tools

2

Step by step

12 steps
  1. Park the vehicle, shift into Park, and turn the wipers off.
  2. Compare the old blades with the new ones. The length must be 650 mm on the driver side and 500 mm on the passenger side. The attachment must match the original. A blade that doesn't fit may not connect to the arm and could damage the wiper system and the windshield.
  3. On the screen, tap Controls > Service > Wiper Service Mode and turn it on. The wipers will move to the service position.
  4. Lift the wiper arm away from the glass just far enough to reach the blade. The arms do not lock in the raised position, so hold the arm by hand and don't pull it back any farther than necessary.
  5. Place a towel or cloth between the arm and the windshield so the arm doesn't scratch or chip the glass if it slips out of your hand.
  6. While holding the arm, press the release tab on the blade mount and slide the blade down the arm until it comes off. The tab design depends on the vehicle's production date, so watch how the old blade is held on.
  7. Align the new blade with the arm and slide it toward the end of the arm until it locks into place with a click.
  8. Check that it's locked: pull the blade along the arm and push it back. It should not move. If you didn't hear a click, the blade could come off during operation and seriously damage the glass.
  9. Carefully lower the arm onto the glass. Don't let it drop from a height.
  10. Repeat steps 4-9 for the other arm.
  11. Remove the towel and turn off Wiper Service Mode so the wipers return to their normal position.
  12. Pour a little water on the glass or use the washer fluid, and check the wipers at low and high speed. The blades should not catch on the pillar or on each other, and the wiped area should be even, with no streaks.

Common mistakes and warnings

  • The arms do not lock in the raised position
  • A released arm will slam into the windshield, so hold it by hand and always place a cloth underneath
  • Don't turn the wipers on until you've confirmed the blades are snapped in place
  • Don't install blades that differ from the originals in size or attachment type
Spotted a mistake? Tell us →

Our articles

More articles →