Autopapyrus · Tesla Model X (2019)
https://autopapyrus.com/catalog/tesla/model-x/guides/wiper-blade-replacement/
https://autopapyrus.com/catalog/tesla/model-x/guides/wiper-blade-replacement/
Compiled automatically from service literature and owner experience. Specs are for the typical configuration — check them against your exact car before you start.
Tesla Model X (2019): Wiper Blade Replacement
On the Model X, replace the wiper blades at least once a year. The washer nozzles are built into the blades themselves, so you disconnect and reconnect the washer hose when replacing them. 2019 vehicles are first-generation (2015-2020), so use blades made for those years.
Key figures
- Driver-side blade lengthfor step 8, so you buy the right blade26 in (650 mm)
- Passenger-side blade lengthfor step 8, so you don't mix up the blades21 in (530 mm)
Check these values against the manufacturer’s specification for your vehicle before you start.
Parts
2| № | Part |
|---|---|
| 01 | Driver-side wiper blade, 26 in (650 mm), with integrated washer1 pcFind on Amazon → |
| 02 | Passenger-side wiper blade, 21 in (530 mm), with integrated washer1 pcFind on Amazon → |
Amazon links search by the part name; use Amazon's fit check for your car before ordering. We may earn a commission from qualifying purchases.
Tools
2Step by step
14 steps- Park the vehicle, shift into Park, and turn the wipers off.
- On the touchscreen, go to Controls > Service > Wiper Service Mode. The wipers will move to the service position.
- Lift the wiper arm away from the glass just far enough to comfortably reach the blade. The arms do not lock in the raised position, so don't pull them back past their normal range, and hold them with your hand.
- Squeeze the two tabs that hold the blade on the arm.
- Place a towel between the arm and the glass so the arm can't strike the glass.
- Once the tabs are released, the blade is still connected to the washer hose. Carefully pull the hose off the blade's fitting, taking care not to spill any fluid.
- While holding the arm, press the locking tab and slide the blade along the arm to remove it.
- Make sure the connector on the new blade matches the old one, otherwise it won't seat on the arm.
- Push the washer hose all the way onto the fitting on the new blade.
- Align the new blade with the arm and slide it toward the end of the arm until it clicks (you should hear and feel it).
- Check that it is secure: tug the blade in both directions along the arm and side to side. It must not move.
- Carefully lower the arm onto the glass, remove the towel, and repeat steps 3-11 for the other arm (the blades are different lengths, 26 in and 21 in, so don't mix up the sides).
- Turn off Wiper Service Mode on the screen. The wipers will return to their working position.
- Turn on the washer and wipers. Check that fluid sprays and that the blades clean the glass without streaks or chatter.
Common mistakes and warnings
- A blade that isn't locked in place can come off during operation and seriously damage the glass and the wiper mechanism, so always do the tug test (step 11)
- Do not install blades that are not identical to the factory ones, as they can damage the system and the glass
- Don't let go of the arm without a towel in place: it can strike the glass
Spotted a mistake? Tell us →
Our articles
Brand stories
The History of the Tesla Brand
Tesla Motors, a North American company founded in 2003, is rightly considered the pioneer of a new era in the…
Read →
Garage
Fuel Quality Indicators: What Octane and Cetane Numbers Mean
What is an octane number? What about a cetane number? Which fuel should you choose for a high-compression engine?…
Read →
Before you buy
How to Pick Up Your Car from the Dealership the Right Way
If you've decided to buy a car from a dealership, it isn't enough to simply choose a model you like, pay for it, and…
Read →